A couple of snagettes
-
That is odd as the airbrake should have a significant effect. I've just been tweaking the autopilot and descended like the Space Shuttle with idle thrust and full airbrake.
Can you send some screenshots to the support team showing the cockpit state at that point?
-
@Martyn
Cheers Martyn. Its great to have all of the paints that I grew up with.Jersey European and the original TNT (Nitro Callsign - which was much better than the later Quality when they moved to Belgium) and lots of potential for more (Loganair, Air UK, the other Titan liveries (the original black one and the blue planet one) Its such a robust airframe.
-
@Mikealpha The 146 didn't do anything particularly quickly. It was able to do steep approaches and had a distinctive nose down approach but the airspeed below FL10 wouldn't have often been 270 kts, usually 220 or less. above FL10 the descents would be more gradual.
The descending like a stone comment may have been more in reference to finals, particularly somewhere like EGLC. The airspeed would have been low before entering final approach. and at that point the decent rate would have been high, but the airbrakes would have easily kept the speed below 200kts. -
Ok, that's good to know, thanks for the info !
That is odd as the airbrake should have a significant effect
Odd indeed. I only remember ice warning was active and I had all icing protections turned on. Could be the AirBrake does not extend in icing conditions ?
However, I'll check again later today and will send screenshots. -
Looking at the code logic, the airbrakes should deploy if the green hydraulic system is available and both thrust lever 1 and 4 are below take-off power (approx. 75%). The airbrake position should then be controlled by the position of the lever on the centre console.
-
it works, but ONLY when using the Spoiler "/" key @XR219 (thanks !!) mentioned. AirBrake does NOT work when operating the lever in the VC with the mouse.
To make it even more interesting, the AirBrake out/in using the "/" key works only once, then not anymore.Would be great if this could be fixed.
-
@XR219 said in A couple of snagettes:
@Mikealpha I've tried it on the ground and in the air using both the VC and the "/" key and both are working for me. Could it be something you may have coded in FSUIPC or your stick settings clashing with it? (P3D 4.5)
@XR219 That's weird. No, I don't have FSUIPC active and have not defined anything related to spoiler on the stick.
It's a new Thrustmaster TCM Airbus Stick with Elevator/Aileron/Rudder/Throttle defined and all buttons used for ChasePlane Views. I just checked again the control assignments in P3D, there is nothing.