BAe 146 Professional P3D v5 FMS/AP Issues

IanB2469

Yes asked to log in. With latest update I still have no power/click spots on the FMS...

Ither

Am I missing something or are SID/STAR not available? Or are they available for select? I can't seem to get any but then I saw couple posts up where people said they could only choose a couple.

Oskar3058

@Craig yes first time asked for login details. Since then no

Oskar3058

@IanB2469 the fms is still dead here, getting a little annoying at the moment,installing deleting etc

Martyn

Just to clarify, the FMS not appearing at all is a distinct issue from any related to specific functionality as mentioned above, and it's still being investigated through the support and development teams.

PVJ

@Martyn

appreciate the hard work you guys are putting in.

1.03 clean install.

Issues I have had:

1.FO ASI needles not moving.
2. Temp readout flickering between 9-10
3. FMS still cannot select a SID beyond selection 4
4. Landing gear does not retract at all after take off, Red light stays on when selecting landing gear up. Was working previously
5. FMS: selecting a STAR via menu page on the FMS it does not show any of the waypoints on the FPL page
6. FMS cannot delete arrival airport? is this correct to the system and you have to delete the whole entire flight plan?
7. FMS cannot delete a waypoint until Arrival airport is entered.
8. Not sure this is coded or not but VNAV ascending and descending on the AP doesn't work consistently. If I go to V/S mode and then back to VNAV, it will not function. Never got it to work for descent yet.

Happy to provide screenshots if needed.

Martyn

1.This is already fixed for v1.4 (manual fix info here - https://community.justflight.com/topic/1368/a-couple-of-snagettes/2)
4. I can't see any changes that'd cause that and it is working correctly here so hopefully just a temporary glitch somewhere
8. VNAV isn't functional on the 146 so please ignore that mode

Looking into the others.

pdp

My issues on a clean 1.03:

I could only select the first two SIDs from EPLB on either runway (07 or 25)
A couple of times I was able to entirely lock-up the FMC whilst trying to edit the flight plan, causing it to go blank. Weirdly trying to turn it off fixes that?
I can't select any RNAV STARs, examples are LHBP or EPWA

ConcordeAG

For me, the LOC/GS capture is still totally messed up and not usable in IMC conditions. Had to use the hdg bug and manually go down. Since the F/D also wants to turn away from the LOC, it wasn't usable either.

For some funny reason, the arrow on the HSI is pointing into the opposite directon, as per my understanding, this should point towards the VOR/LLZ.
http://prntscr.com/vudqb7

PVJ

@Martyn said in BAe 146 Professional P3D v5 FMS/AP Issues:

VNAV isn't functional on the 146 so please ignore that mode

Just in addition:

ILS LOC capture does not stay on track once established, veers off.
G/S not consistent degree path, always adjusting, maybe due to LOC issue, but more stable than the LOC.
Trim needs to go beyond green band for take off. If left in the green band and departing, if I let go of the yoke it nose dives 100ft after departure, needs a fair bit of trim to get it set properly.

Martyn

@ConcordeAG The HSI is fitted with a TO and FROM arrow. Here is a pic that I've just taken when flying to a VOR.

The course flag (white/red) is shown in your pic which indicates that the HSI doesn't have a valid VOR signal. I will double-check what the behaviour should be in the case of a localiser.

ConcordeAG

that looks better yes - Might be a relation to the intercepting/track issue of the LLC

Martyn

@ConcordeAG Yes, I've now changed the behaviour of both the TO/FROM indicator and course flag when a localiser is tuned.

Martyn

@ConcordeAG said in BAe 146 Professional P3D v5 FMS/AP Issues:

For me, the LOC/GS capture is still totally messed up and not usable in IMC conditions. Had to use the hdg bug and manually go down. Since the F/D also wants to turn away from the LOC, it wasn't usable either.

I'm still unable to reproduce that here. The AP/FD always intercept and then track the localiser/glideslope and never turn away from the localiser. Can you get in touch with the support team about that one so we can investigate further and try to reproduce then fix it?

ConcordeAG

@Martyn already did that.

ConcordeAG

@Martyn here the screenshots i just attached to the ticket - The small yellow diamond which stays at 000 - that's what it tries to intercept.

for VOR it works, not so much on the ILS.

Just tried to hookup NAV 2 - with that it works a bit, not as it should, but it intercepts and follows the general direction... Not with NAV 1

Intercept:
Bild Text

Turns away:
Bild Text

Chases the diamond:
Bild Text

Martyn

The lack of HSI MILES read-out and presence of the FROM rather than TO indicator is curious. Which airport and ILS approach is this so I can reproduce it?

ConcordeAG

LFSB, ILS15

Craig

@ConcordeAG said in BAe 146 Professional P3D v5 FMS/AP Issues:

LFSB

Are you using addon scenery such as JUSTSIM - EUROAIRPORT BASEL MULHOUSE FREIBURG?

ConcordeAG

FSDT in my case - but i have the same everywhere else too :)

So far:

ORBX EGNX
ORBX EGNT
ORBX EGHI
Aerosoft EDDK
Gaya LOWW
Digital Design EDDP
FSDT LFSB
....

Basically everywhere the same.