TQ6+ and the reverse detent
-
I opened a ticket with Virtual Fly, however, they lost my original ticket so starting over with them. However will give Chotter's settings a try. If VirtualFly comes back with anything amazing, will post it here.
*** Update ***
Virtual fly says, don't use VFHub and they don't offer support for 3rd party add-ons, so SOoL getting help there. Left pretty a pretty sour taste to be honest for a premier product. -
Actually, this is a limitation of MSFS, not the tq6 or the addon. In X-Plane you can easily configure these kinds of settings (you can even assign four positions to a single axis to emulate the flaps’ four positions). I don’t know if this is possible with Mobiflight or other payware options.
In any case, it would be very helpful if they provided a "curve-configuration" tool in VFHub. -
@jmarkows said in TQ6+ and the reverse detent:
$2000 for a throttle quadrant and that's the response???
It's more like $850 but yeah this isn't a problem with the quadrant, its MSFS being just so half-arsed in places like controller config. As I mentioned in my OP and as another commenter has said, Xplane handles things just fine. Cleverly even. MSFS is just out dated in that respect.
-
Oh my bad, I've been eyeballing the TQ Neo for a while which is that higher price.
And no, I didn't suspect it was the quadrant, but still for the premium price "we don't support third party add-ons" is quite the damn statement. Nobody is buying these for stock aircraft.
-
I opened a ticket with Virtual Fly, however, they lost my original ticket so starting over with them. However will give Chotter's settings a try. If VirtualFly comes back with anything amazing, will post it here.
*** Update ***
Virtual fly says, don't use VFHub and they don't offer support for 3rd party add-ons, so SOoL getting help there. Left pretty a pretty sour taste to be honest for a premier product.There's definitely something fishy going on.
Sorry to ping but perhaps @Black-Square and @brettsan would be interested in my specific woes!
You see, the Bonanza TP, the Turbine Duke and (my beloved) Starship all work just fine with the TQ6+ using VF Hub, and I think I'm right in saying all have that 15% ground idle axis thing going on, right? The same as the Caravan. I think?
But the caravan goes maybe 20% (a guess) in to its reverse range when you pull the TQ6+ throttle all the way back past the detent to the stop.
@Black-Square - For the record I love your work and I'm not blaming you, working with everyone's different hardware is hard and MSFS makes it harder than it needs to be. But all ideas appreciated because your other planes work fine with it.
@brettsan - I wonder if they DID do something specific in VF Hub for the other planes and haven't done it for the Caravan (yet)?
@Chotter - Thanks for your work on this too. It does seem to work great but like you say you lose the ability to feather (which works with VF Hub) and you have to set that stuff at the top level, sot it affects all aircraft which puts me right off as I fly a lot of different stuff, and that setting isn't profile-based.
-
There's definitely something fishy going on.
Sorry to ping but perhaps @Black-Square and @brettsan would be interested in my specific woes!
You see, the Bonanza TP, the Turbine Duke and (my beloved) Starship all work just fine with the TQ6+ using VF Hub, and I think I'm right in saying all have that 15% ground idle axis thing going on, right? The same as the Caravan. I think?
But the caravan goes maybe 20% (a guess) in to its reverse range when you pull the TQ6+ throttle all the way back past the detent to the stop.
@Black-Square - For the record I love your work and I'm not blaming you, working with everyone's different hardware is hard and MSFS makes it harder than it needs to be. But all ideas appreciated because your other planes work fine with it.
@brettsan - I wonder if they DID do something specific in VF Hub for the other planes and haven't done it for the Caravan (yet)?
@Chotter - Thanks for your work on this too. It does seem to work great but like you say you lose the ability to feather (which works with VF Hub) and you have to set that stuff at the top level, sot it affects all aircraft which puts me right off as I fly a lot of different stuff, and that setting isn't profile-based.
Sorry I'm a little behind on this thread.
@Jiblet said in TQ6+ and the reverse detent:
But the caravan goes maybe 20% (a guess) in to its reverse range when you pull the TQ6+ throttle all the way back past the detent to the stop.
Pardon me for starting with the basics, but how have you determined this? Are you reading the
(A:GENERAL ENG THROTTLE LEVER POSITION:1, percent)variable to see what your hardware is actually setting? If the variable is reading zero when your throttle is against the reverse stop, then the Caravan is not in reverse. Sorry if I sound doubtful. This part of the code should be the same as all my other aircraft, which breaks the throttle input range at exactly 0% and 20% (5% deadband over 15%). Just looking for any hints that might help find you a solution. -
There's definitely something fishy going on.
Sorry to ping but perhaps @Black-Square and @brettsan would be interested in my specific woes!
You see, the Bonanza TP, the Turbine Duke and (my beloved) Starship all work just fine with the TQ6+ using VF Hub, and I think I'm right in saying all have that 15% ground idle axis thing going on, right? The same as the Caravan. I think?
But the caravan goes maybe 20% (a guess) in to its reverse range when you pull the TQ6+ throttle all the way back past the detent to the stop.
@Black-Square - For the record I love your work and I'm not blaming you, working with everyone's different hardware is hard and MSFS makes it harder than it needs to be. But all ideas appreciated because your other planes work fine with it.
@brettsan - I wonder if they DID do something specific in VF Hub for the other planes and haven't done it for the Caravan (yet)?
@Chotter - Thanks for your work on this too. It does seem to work great but like you say you lose the ability to feather (which works with VF Hub) and you have to set that stuff at the top level, sot it affects all aircraft which puts me right off as I fly a lot of different stuff, and that setting isn't profile-based.
I think they might, because when I fly PMDG, I can't get things in MSFS to work correctly using default configurations. My solution was to either use FSUIPC or VFHub. I think years ago when PMDG first came out I also asked for assistance from VF, and was told to use VFHub. (I'll double check to make sure I am not making things up as I have it buried somewhere in my gmail)
-
Oh my bad, I've been eyeballing the TQ Neo for a while which is that higher price.
And no, I didn't suspect it was the quadrant, but still for the premium price "we don't support third party add-ons" is quite the damn statement. Nobody is buying these for stock aircraft.
@jmarkows
My two cents... the hardware is good, won't deny that. However, the configuration for different planes is a pain and I find myself always having to tweak things to get things working. My recent experience with support was a first, as in the past things have been fine. VF is a small company that "did" care about service, so not sure what happened this last time.With that said, the competition in the market know is fierce, and I think you should look at other options. The main features of the TQ6's where the hall sensors and being able to apply friction to the throttle... O and everything is metal. This is something now you can find in other throttles for a lot less.
-
Not to derail the topic too much, but my GA setup is a TB Velocity One, which I enjoy, but I need more for twins. I think the Bravo is overhyped and I'm waiting with bated breath for this new Meridian line, but I'm open to suggestions if you have them.
Been eyeballing the TQ Neo for a long time, but the price and lack of buttons has put me off.
