Performance Issues with Starship – Sporadic FPS Drops
-
Very interesting! That's admitted a little strange, since ND 2 runs the exact same code... This might take a little more experimentation. I will look through things later and see what I can come up with, but on your next flight, try configuring ND 2 to show exactly the same as what ND 1 is showing, and see if the problem is exhibited by both units. Thank you for the help!
-
I’m having a very similar issue.
After about an hour of flying, I get a major FPS drop — from 160 down to around 40 — and GPU usage drops to 0%–30%.
When I press ESC and pause the flight, GPU usage returns to normal, but as soon as I resume, the performance drops again.
Everything runs perfectly at the start of the flight — this only happens mid-flight.Specs:
• CPU: AMD Ryzen 7 9800X3D
• GPU: RTX 5080 -
Very interesting! That's admitted a little strange, since ND 2 runs the exact same code... This might take a little more experimentation. I will look through things later and see what I can come up with, but on your next flight, try configuring ND 2 to show exactly the same as what ND 1 is showing, and see if the problem is exhibited by both units. Thank you for the help!
@Black-Square Okay, I'm uploading another video showing the FPS drop. As you can see, only disabling ND No. 1 helped. Turning it back on doesn’t cause the drop either. But if we look at all three videos I uploaded, they’re all from the same route, and the issue generally always occurs around the same point — just before reaching the ROGAL point. Maybe it’s a coincidence, maybe not.
https://youtu.be/mEYfGcpgg50
-
Thanks for showing exactly what I have been asking to see! I finally have a chance to spend some time on this later tonight. I will let you know what I find. At least you can continue your flight to landing after pulling one circuit breaker. I know that's far from ideal, but I'm glad there is some solution that at least gives you the satisfaction of a smooth landing while I work on the problem.
Did you try the BIOS change suggested above? Specifically enabling C-State Control? It would be interesting to see if that could change the outcome, now that we've collected some data.
-
Thanks for showing exactly what I have been asking to see! I finally have a chance to spend some time on this later tonight. I will let you know what I find. At least you can continue your flight to landing after pulling one circuit breaker. I know that's far from ideal, but I'm glad there is some solution that at least gives you the satisfaction of a smooth landing while I work on the problem.
Did you try the BIOS change suggested above? Specifically enabling C-State Control? It would be interesting to see if that could change the outcome, now that we've collected some data.
@Black-Square Yes, I enabled C-State Control, but it's still the same. At least I can continue the flight by turning the circuit breaker off and on
. Thanks for looking into the issue.edit: I discovered something new — even if I turn off ND No. 1 and turn it back on, the FPS starts dropping again after a few dozen seconds. So I have to turn off the breaker again, but once I turn it back on, the FPS drops again after several dozen seconds. Unfortunately, I don’t have a recording of it because something went wrong and it didn’t record.
I also discovered that the FPS starts dropping for the first time between 55 -60 minutes of flight.
-
I have no idea if this is related as I have a 5800x 3d without C State but on tonight's flight on landing, the fps dropped to 10fps and this has never happened before. It could just be the sim, the servers etc but thought I would add here as it was in the Starship.
Ryzen 5800X3D, 64GB RAM, RTX 4090, Windows 11
-
I have no idea if this is related as I have a 5800x 3d without C State but on tonight's flight on landing, the fps dropped to 10fps and this has never happened before. It could just be the sim, the servers etc but thought I would add here as it was in the Starship.
@toby23 If it was maybe 10-20ft off the ground and recovered shortly thereafter on MSFS 2024, this happens to me constantly with every single aircraft. I thought we were done with severe stuttering in the flare with FSX, but I guess not.
-
Yes, this was exactly what happened.
The ground textures turned very blurry in a small circle around my aircraft too, maybe a 10m radius.
The only add-on I use that changes LOD is AutoFPS but I use AutoFPS on every flight and have never seen this behaviour before.
Always a giant leap forwards and then fall backwards with this sim. I can't wait until it's more stable.
Thank you for your feedback and good luck with your Simisms -
Unfortunately I still has this issue randomly coming up even after 1.2 . It only happens to Starship and I believe it has to something with custom avionics.
Recently I upgraded to RTX5090 thinking may be related video memory issue obviously its not . I tried several long hauls routes without any issue. Then intermittent stutter came back - every second micro stutter. It usually happens enroute and all the way to the landing. I program FMS manually typing each waypoint using keyboard. The only thing come to my mind is something to do with waypoint programing.
