Transfert Fuel calculation OFF with 1.1
-
I did not notice any discrepancy. With engines off or on lower power settings, the tank you're transferring to is visibly filling. However near full power, the fuel burn can be comparable, maybe even higher, than the amount transferred in, so you may not notice the fuel level rising, it could even go down, but at a lower rate than with transfer off.
-
I can confirm that on my side. During before-startup checklist. Battery ON the transfer fuel doesn't work as it used to do. Nothing is actually transfered on the fuel quantity dislplay. Actually when the engines are on and idle: the transfer works as the fuel diminished on the L tank for exemple but the R tank doesn't raise the value. That's only since 1.1.
-
Yes, I'm on v1.1 in MSFS 2024 SU2 and it works for me as expected. Tried with either on GPU or with engines on. Battery alone is probably not enough to power the pumps, you may need to play with bus tie switch.
One more thing comes to mind, are you trying with the standby pumps off? The transfer switch should engage the pump it needs to, but if you manually turn on the wrong pump, it may push against the transfer flow.
Also which sim version are you on? -
Yes, I'm on v1.1 in MSFS 2024 SU2 and it works for me as expected. Tried with either on GPU or with engines on. Battery alone is probably not enough to power the pumps, you may need to play with bus tie switch.
One more thing comes to mind, are you trying with the standby pumps off? The transfer switch should engage the pump it needs to, but if you manually turn on the wrong pump, it may push against the transfer flow.
Also which sim version are you on?
