Brakes not working in MSFS 2024
-
Did you start from a cold/dark state at a parking position, or spawn on the runway running? I’ve had this before in MSFS. Runaround is to start on the runway, slew over to your gate, and shut down manually. A pain, but it works most all of the time until a permanent solution is found by the team.
-
Yes, had same issue just now. After pushback and release of parking brake I had no brakes either via pedals or parking brake. All bindings checked and confirmed that default keyboard bindings not working either. Aircraft pedals moving but no braking action. All hydraulics are green and OK. Will see if I can replicate. This was from a cold n dark start.
-
I did one flight after I bought F28 and brakes stopped working sometime during a flight. They did work when I was taxing to the runway on departure but when I landed, I could not stop the plane. Both hydraulic pressure in system 1 and brake temperatures were in green.
-
@StefanL85 are you loading into a gate, and if so, are you selecting a panel state in the EFB at all?
-
@StefanL85 are you loading into a gate, and if so, are you selecting a panel state in the EFB at all?
@ual763 I'm loading to a gate/parking spot in cold and dark, without using the panel states on the EFB.
Did that both times. There was one difference in procedure. The first time I didn't turn on the electrical pumps to pressurerize the systems before engine startup. Figured there will be pressure supplied to both systems when engines are running. Which was the case. All indications in the green. But no stopping power.
-
-
Issue is back after SU2, sitting here at the gate and the plane keeps on rolling after engine start, toe brakes and parking brake do not stop it.. hydraulic pressure is ok, issue remains if pumps are manually on. No brake pressure shown on the left gauges, pedals (to brakes) are moving. GSX integration selected, but have only done boarding with it, nothing more.
-
Issue is back after SU2, sitting here at the gate and the plane keeps on rolling after engine start, toe brakes and parking brake do not stop it.. hydraulic pressure is ok, issue remains if pumps are manually on. No brake pressure shown on the left gauges, pedals (to brakes) are moving. GSX integration selected, but have only done boarding with it, nothing more.
@MatzeH84 I've just had a look at this and I'm not able to replicate this behaviour using F28 v0.2.1 and SU2 at the moment.
If the System I hydraulic pressure indicator is indicating 0 PSI, it would be expected that the brakes do not function, as there is no pressure in the system. With the engines shutdown, System I brake pressure will be depleted every time the toe brakes are applied, but with the engines running, the pressure should be maintained in the green band range if all of the hydraulic pumps switches are in the NORMAL positions.
If that occurs again, would you be so kind as to attach a screenshot or video of the behaviour so we can see if we can spot anything abnormal?
Mark - Just Flight
