TBM 850 Com1 Frequency Calibration
-
New owner of the 850. Great addon, thank you much..
On Pilot Edge (Online ATC Simulation) the 850's Com1 radio needs to be tuned to "The Facility Radio Frequency" + 0.005 mhz for me to receive and transmit to the controllers. This is not the case with Com2. I am only experiencing this when using the Bendix/King KX-155B's with both GNSS units removed.
Is this a failure feature of the 850, or is there something else going on I need to address.
Thanks
-
I'm glad you're enjoying the aircraft. Please take a look at this post and let me know if this sounds like what you're experiencing. If so, it will be fixed in the next update. It should affect both COM1 and COM2 KX-155's, though. If you're seeing something different, let me know and I can look into it further.
-
It is what I am experiencing, although only on one radio. This is confirmed on my last two flights on PilotEdge since I was able to test the exact frequencies that were working on one radio, but not the other at the same time with the controller. Let me know if I can help in any way.
