Duke Lvar Values Not Correct

e4rthdog

Thanks it worked.

For anyone wondering how to do this in FSUIPC:

Page 49 of the advanced FSUIPC manual:

Create a file myevents.txt in the fsuipc directory
Create a profile entry there like this:

duke-att-wheel-rst#(A:PLANE PITCH DEGREES, degrees) (>L:var_AP_PitchKnob, number)

bind the duke-att-wheel-rst preset to the button you like.

I assign the AP_ALT_HOLD to the press event of the button and the duke-att-wheel-rst preset to the release of the same button. In that way the AP goes to ATT mode at the current pitch.

Russos

Hello! I can’t understand how Left/Right Landing Light works

B:LIGHTING_LANDING_1_Toggle - is this a button to toggle?
(1 K:LANDING_LIGHTS_SET) - is this for the toggle switch? But what does the number 1 (or 2) before the letter K mean? There seems to be no such syntax in Mobileflight.

Thank you!

Randolf

@Russos
K:LANDING_LIGHTS_SET is the name of the event, and you should call it with parameter 0 for both OFF and 2 for ON.
If you want to control them separately, you'll need to use the B events.

Russos

Thank you!
Then I don't really understand the B event syntax for separate control for toggle switch

SMN204

@Randolf said in Duke Lvar Values Not Correct:

K:LANDING_LIGHTS_SET is the name of the event, and you should call it with parameter 0 for both OFF and 2 for ON.
If you want to control them separately, you'll need to use the B events.

I need one switch for both (left and right) for FSUIPC
I wrote it like this... probably wrong :-( Not work

LandingLightOn# (2K:LANDING_LIGHTS_SET)
LandingLightOff# (0K:LANDING_LIGHTS_SET)

Can you tell me how to write a correctly?

Randolf

@SMN204 don't have FSUIPC here to test, but try this:

LandingLightOn#2 (>K:LANDING_LIGHTS_SET)

LandingLightOff#0 (>K:LANDING_LIGHTS_SET)

SMN204

@Randolf said in Duke Lvar Values Not Correct:

@SMN204 don't have FSUIPC here to test, but try this:

LandingLightOn#2 (>K:LANDING_LIGHTS_SET)

LandingLightOff#0 (>K:LANDING_LIGHTS_SET)

It's working! Thank you!

Rolo Bach

Can't find on the manual any Lvar to set external power and heater. May be posted here?
Thanks.

hangar_101

@Rolo-Bach here as I have it done using spad.next for External Power - it's mapped to a StreamDeck button

External Power On

External Power Off

StreamDeck example

hangar_101

@Rolo-Bach for the Heater the LVAR:bksq_PreHeater will do the job (0 = OFF, 1 = ON)

Rolo Bach

Many thanks !!!