Tablet Screen Blank
-
@Uli said in Tablet Screen Blank:
I'm happy to hear that I am not alone with this exact problem :D
The tablet is black and I can see a faint "selftest screen" on the weather radar and on the transponder. Guess they are the standard textures when there is no overlay shown. The engine trend monitor is also not working. Analog engine instruments all seem to work fine.
Happens both for Turbine and Piston versions. On the BS-TBM everything works fine.
Already tried to repair via the installer and reinstalling SU15 with no luck so far.I just submitted a ticket, will report back any news.
-
Thank you for being descriptive about the problem you're experiencing. Whenever tech support receives tickets were the weather radar screen is stuck like that, it is indicative of an avionics server crash. This is almost always caused by a mod conflict. If you've recently made the recommended change to the WT GNS 530/430, that could also be a possible source of error.
I recommend first trying the aircraft with a completely empty community folder. If that does work, let me know and we can troubleshoot together. Support may also have some recommendations, as they've gotten quite good at troubleshooting mod conflicts with my other aircraft.
-
@Black-Square said in Tablet Screen Blank:
Thank you for being descriptive about the problem you're experiencing. Whenever tech support receives tickets were the weather radar screen is stuck like that, it is indicative of an avionics server crash. This is almost always caused by a mod conflict. If you've recently made the recommended change to the WT GNS 530/430, that could also be a possible source of error.
I recommend first trying the aircraft with a completely empty community folder. If that does work, let me know and we can troubleshoot together. Support may also have some recommendations, as they've gotten quite good at troubleshooting mod conflicts with my other aircraft.
I cleared out my community folder and that did not help the situation. I didn't have a lot of mods other than scenery. I did recently do the patch, how would I know if it wasn't done correctly?
-
Have you tried loading the GNS 530 in another aircraft, like the default C172 Classic? You could also revert the patch (hopefully you saved a copy of the original files. If not, you could delete the WT530.js, and the simulator should download a fresh copy next time it loads). This might allow the avionics to load so you can see if that was the problem, but you will still need to make the patch correctly for the autopilot to work as expected.
-
@Black-Square said in Tablet Screen Blank:
Have you tried loading the GNS 530 in another aircraft, like the default C172 Classic? You could also revert the patch (hopefully you saved a copy of the original files. If not, you could delete the WT530.js, and the simulator should download a fresh copy next time it loads). This might allow the avionics to load so you can see if that was the problem, but you will still need to make the patch correctly for the autopilot to work as expected.
Will give that a shot. I did save the original files for those. Will report back my findings.
-
@Black-Square Don't want to hijack the troubleshooting session, but thank you for the hint with the community folder. In my case I renamed the original folder, after which both duke versions started to work properly after a re-installation. I then tried singling out the one add-on causing the problem. It turned out that "pms50-instrument-gtn750" was most likely the culprit. Might have to do with a parallel installation of the TDS GTNXi module. Now everything works perfectly. Thank you again for the help :)
-
So it looks like, I must have not done the patch correctly as it seems to be working now. Hopefully I did the patch correctly this time.
-
I suspected that might be the case, as I've seen it a few times now. There's a nice little tutorial on the official forums if you have any more trouble. Let me know how it goes!
-
Thanks for letting us know! Almost all of the issues that tech support helps troubleshoot when it comes to avionics trouble are resolved by cleaning and updating GPS addons in the community folder.
-
So I did a test with the PMSGTN and the GTN650. Everything seems to be working other than the plane will not follow the GPS track. Is this related to the patch still not being correctly installed?
