Mixture axis not moving (Bonanza & Baron)
-
I'm using Spad.next to map my controls, unfortunately I'm not able to have the mixture axis animate when mapping through Spad.next.
Can this be resolved?
-
Although I can't speak for all 3rd party input binding tools, here are my recommendations from the FAQ in the manual:
Please make sure that your hardware bindings are using the Key Events, such as “K:MIXTURE1_DECR_SMALL”, or “K:MIXTURE1_SET” to set the mixture, and NOT setting either “A:GENERAL ENG MIXTURE LEVER POSITION:1”, or “B:FUEL_Mixture_1_Set”. Alternatively, setting “L:BKSQ_MixtureLeverPosition_1” from 0-100 will also work to set the mixture axis.
-
I did a quick test, trying to re-map the bindings, but did not get the mixture to move. However, I should add that the non-turbocharged version works as expected. Does that give you an idea of what the problem could be?
-
That's expected. I try to keep things as simple as possible, so I didn't do anything with the mixture controls in the normally aspirated version. L:BKSQ_MixtureLeverPosition_1 should never fail to work, though. Is it possible that you have some other hardware that's also trying to write to the mixture axis? I've seen that reported from tech support too.
-
L:BKSQ_MixtureLeverPosition_* worked!
Thank you
