Great philosophy and product, but I must be doing something wrong
-
@deepsky Hi, I have no problems in EDDF or EDDM. I have arrivals and departures (departure value 90). But I use addons. EDDF feelthere, EDDM SimWings and GSX on both.
-
@goose-28 I.e. you have the right number of departing and arriving aircraft? I don't, unfortunately.
I also noted that FS Traffic displays very distant aircraft, as can be seen from the screenshot you posted. When I checked last time on LittleNavMap, I could see planes as far away as 1,000 km. I don't think that's a good use of CPU power. I would rather have more planes close to me.
I helped myself with a trick that I came across somewhere else. I am using both FSLTL and FS Traffic at the same time, while ensuring FSLTL only uses FS Traffic models. I also unlinked the FSLTL fleet from the Community folder to make sure none of the FSLTL models are used as a fallback. This gives me reasonable frame rates and a reasonable amount of traffic.
-
Just replying to the thread I opened myself. After playing around with FS Traffic for quite a while, I have been able to make it work much better for me. If it helps others, here are the steps I've taken:
-
As FS Traffic currently uses flight plans from 2022, we're automatically going to see much (!) less aircraft movements as these flight plans were affected by Corona. It means you'll see up to 50% less aircraft movements. That's a lot! It may have been a better option to include 2019 flight plans with the release of FS Traffic, but it's ok, they will be provided later. If you want to see more traffic, you need to manually edit the flight plans. I've developed an efficient system of doing that using Excel and uploaded a sample of my work here. As you can see, the airports are extremely busy. https://flightsim.to/file/55822/fs-traffic-rush-hour-schedules-for-eddf-and-kjfk Happy to provide my excel file if anyone is interested.
-
Most flight plans, also a consequence of Corona, only have 1, 2 or 3 flights per week for lots of the routes. This is because during Corona, airlines reduced the frequency of their flights. As we have the 2022 flight plans, you will certainly see more aircraft departing and landing at your airports if you simply replace the 'days' in the relevant flight plans for each route by "1234567*". This means the flights depart every day each week.
-
If you want to see more aircraft at your airport, go to the FS Traffic Control Center options and set the timer to 180 minutes. My airports are much busier this way!
-
Many FS Traffic flight plans have certain 'flights' included in them which you'll never see because FS Traffic does not yet have the model or the livery. I have been able to utilise FSLTL and AIG to a great extent and include their liveries and models in FS Traffic. This is giving me lots of Cargo traffic as well. Happy to elaborate further, but under the link I posted above, there's a short summary.
Hope this helps. My recommendation to the FS Traffic team (thanks for your work again, really appreciated!) is to ensure that by default, users have busy airports. This can easily be achieved by providing busier flight plans and including more liveries in FS Traffic. As a guideline, a large international airport should have 1,000-1,500 departures per day in non-crisis times. Almost none of the current FS Traffic flight plans, apart from Atlanta, offers this. If including more liveries isn't an option, I suggest that FS Traffic link FSLTL traffic by default where there is a gap. This would allow users to just install FSLTL in addition to FS Traffic and have the full benefits of both addons.
Below are a few pictures of how I managed to get my airports busy. I absolutely love it!
-
-
Just replying to the thread I opened myself. After playing around with FS Traffic for quite a while, I have been able to make it work much better for me. If it helps others, here are the steps I've taken:
-
As FS Traffic currently uses flight plans from 2022, we're automatically going to see much (!) less aircraft movements as these flight plans were affected by Corona. It means you'll see up to 50% less aircraft movements. That's a lot! It may have been a better option to include 2019 flight plans with the release of FS Traffic, but it's ok, they will be provided later. If you want to see more traffic, you need to manually edit the flight plans. I've developed an efficient system of doing that using Excel and uploaded a sample of my work here. As you can see, the airports are extremely busy. https://flightsim.to/file/55822/fs-traffic-rush-hour-schedules-for-eddf-and-kjfk Happy to provide my excel file if anyone is interested.
-
Most flight plans, also a consequence of Corona, only have 1, 2 or 3 flights per week for lots of the routes. This is because during Corona, airlines reduced the frequency of their flights. As we have the 2022 flight plans, you will certainly see more aircraft departing and landing at your airports if you simply replace the 'days' in the relevant flight plans for each route by "1234567*". This means the flights depart every day each week.
-
If you want to see more aircraft at your airport, go to the FS Traffic Control Center options and set the timer to 180 minutes. My airports are much busier this way!
-
Many FS Traffic flight plans have certain 'flights' included in them which you'll never see because FS Traffic does not yet have the model or the livery. I have been able to utilise FSLTL and AIG to a great extent and include their liveries and models in FS Traffic. This is giving me lots of Cargo traffic as well. Happy to elaborate further, but under the link I posted above, there's a short summary.
Hope this helps. My recommendation to the FS Traffic team (thanks for your work again, really appreciated!) is to ensure that by default, users have busy airports. This can easily be achieved by providing busier flight plans and including more liveries in FS Traffic. As a guideline, a large international airport should have 1,000-1,500 departures per day in non-crisis times. Almost none of the current FS Traffic flight plans, apart from Atlanta, offers this. If including more liveries isn't an option, I suggest that FS Traffic link FSLTL traffic by default where there is a gap. This would allow users to just install FSLTL in addition to FS Traffic and have the full benefits of both addons.
Below are a few pictures of how I managed to get my airports busy. I absolutely love it!
@deepsky said in Great philosophy and product, but I must be doing something wrong:
Just replying to the thread I opened myself. After playing around with FS Traffic for quite a while, I have been able to make it work much better for me. If it helps others, here are the steps I've taken:
As FS Traffic currently uses flight plans from 2022, we're automatically going to see much (!) less aircraft movements as these flight plans were affected by Corona. It means you'll see up to 50% less aircraft movements. That's a lot! It may have been a better option to include 2019 flight plans with the release of FS Traffic, but it's ok, they will be provided later. If you want to see more traffic, you need to manual
Really great but so much manual editing! Would love to see JF update FS Traffic to include GA and Cargo and increase the volume. Empty airports are not what I bought FS Traffic for!
-
-
@deepsky said in Great philosophy and product, but I must be doing something wrong:
Just replying to the thread I opened myself. After playing around with FS Traffic for quite a while, I have been able to make it work much better for me. If it helps others, here are the steps I've taken:
As FS Traffic currently uses flight plans from 2022, we're automatically going to see much (!) less aircraft movements as these flight plans were affected by Corona. It means you'll see up to 50% less aircraft movements. That's a lot! It may have been a better option to include 2019 flight plans with the release of FS Traffic, but it's ok, they will be provided later. If you want to see more traffic, you need to manual
Really great but so much manual editing! Would love to see JF update FS Traffic to include GA and Cargo and increase the volume. Empty airports are not what I bought FS Traffic for!
@toby23 I see it exactly the same way.
It looks great, but I have so much data to download and edit! That is not in my mind. I want to enjoy a product. And not assemble it.I just hope JF adds more planes for this year. A343 -A346 and more.
-
Yes I agree, it would be better if the user would not need to assemble the product. At least, what I can confirm is that the product by itself seems to be functional, with the exception of the flight plans not resembling real life, and quite a few missing models and liveries.
-
Yes I agree, it would be better if the user would not need to assemble the product. At least, what I can confirm is that the product by itself seems to be functional, with the exception of the flight plans not resembling real life, and quite a few missing models and liveries.
-
@deepsky I agree with you there. FS Traffic is quite good. And also easy to use.
I don't know about FSLTL's performance right now, but that's exactly why I chose JF.
But therefore I hope that they still add many models@baxterchico I think for the performance, I have come to know that the performance heavily depends on how many AI aircraft you have moving in your Sim. E.g., if you have 50 airplanes moving, both FSLTL and FS Traffic will have a heavy impact on your CPU. Though I first thought FS Traffic has major benefits with regards to FPS, I'm now experiencing very similar results with both FSLTL and FS Traffic with regards to FPS at heavy AI traffic load. I think you won't have an FPS impact if you use a few FSLTL or AIG models here and there.
-
@baxterchico I think for the performance, I have come to know that the performance heavily depends on how many AI aircraft you have moving in your Sim. E.g., if you have 50 airplanes moving, both FSLTL and FS Traffic will have a heavy impact on your CPU. Though I first thought FS Traffic has major benefits with regards to FPS, I'm now experiencing very similar results with both FSLTL and FS Traffic with regards to FPS at heavy AI traffic load. I think you won't have an FPS impact if you use a few FSLTL or AIG models here and there.
-
@toby23 Hi, I'm glad you like my pack. FS Traffic has added a few models and liveries. You'll still be able to use my pack, the only difference will at the moment be that instead of, e.g., a FS Traffic B757, you'll see an AIG 757. As FS Traffic's models are a little better than AIG's, I'm planning to update my pack so that in the future, FS Traffic planes will show whenever one is available. For the time being, you can continue to use my pack.
-
@toby23 Hi, I'm glad you like my pack. FS Traffic has added a few models and liveries. You'll still be able to use my pack, the only difference will at the moment be that instead of, e.g., a FS Traffic B757, you'll see an AIG 757. As FS Traffic's models are a little better than AIG's, I'm planning to update my pack so that in the future, FS Traffic planes will show whenever one is available. For the time being, you can continue to use my pack.
-
@deepsky Look forward to your update and appreciate the amount of clicking involved. Thank you
