Is there a update or hotfix coming?
-
I could open a support ticket but yeah..........
Don't feel it will help reading all the things on all the forums!So I hope a hotfix will be available soon?
Now I am flying from MTPP to KJFK, I saw one aircraft at the gate at MTPP and no single aircraft enroute so far. I put KJFK as destination and confirmed it in the FSTraffic menu.
Let's see if there is traffic in New York!Update: After 1200NM flying I see another aircraft (1) in the sky!
Gr.
Robert
@rob0203 said in Is there a update or hotfix coming?:
I could open a support ticket but yeah..........
Don't feel it will help reading all the things on all the forums!So I hope a hotfix will be available soon?
Now I am flying from MTPP to KJFK, I saw one aircraft at the gate at MTPP and no single aircraft enroute so far. I put KJFK as destination and confirmed it in the FSTraffic menu.
Let's see if there is traffic in New York!Update: After 1200NM flying I see another aircraft (1) in the sky!
Gr.
Robert
If you submit a ticket with all the details we can add them to other reports we have had and see what commonality or pattern causes whatever the problem is that you're experiencing.
For example, are the airports default or add-on? If the latter, who by? Are you using GSX or a similar program that may be adding objects to the game? etc etc. -
@rob0203 said in Is there a update or hotfix coming?:
I could open a support ticket but yeah..........
Don't feel it will help reading all the things on all the forums!So I hope a hotfix will be available soon?
Now I am flying from MTPP to KJFK, I saw one aircraft at the gate at MTPP and no single aircraft enroute so far. I put KJFK as destination and confirmed it in the FSTraffic menu.
Let's see if there is traffic in New York!Update: After 1200NM flying I see another aircraft (1) in the sky!
Gr.
Robert
If you submit a ticket with all the details we can add them to other reports we have had and see what commonality or pattern causes whatever the problem is that you're experiencing.
For example, are the airports default or add-on? If the latter, who by? Are you using GSX or a similar program that may be adding objects to the game? etc etc. -
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
@rob0203 said in Is there a update or hotfix coming?:
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
Time of day? Traffic is definitely functioning at JFK, so not sure what could be causing this. Support could definitely look into it for you.
-
@rob0203 said in Is there a update or hotfix coming?:
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
Time of day? Traffic is definitely functioning at JFK, so not sure what could be causing this. Support could definitely look into it for you.
And now after a night sleep I start my sim again to start at KJFK time in MSFS is 9:20. And there is no aircraft at all?
I don't understand this sofware anymore, did not change anything. Yesterday there was lots of traffic at the gates upon arrival.
I really hopre there will be a fix soon, it should be plug and play. That why lots of us buy FSTraffic and don't want AIG.
Anyway will also open a support ticket. -
And now after a night sleep I start my sim again to start at KJFK time in MSFS is 9:20. And there is no aircraft at all?
I don't understand this sofware anymore, did not change anything. Yesterday there was lots of traffic at the gates upon arrival.
I really hopre there will be a fix soon, it should be plug and play. That why lots of us buy FSTraffic and don't want AIG.
Anyway will also open a support ticket. -
@rob0203 said in Is there a update or hotfix coming?:
Anyway will also open a support ticket.
Many thanks. That should help us find out why you are seeing no traffic.
-
I am sure you will make it into a great product! There is a lot of negativity but I know you have great reputation and will fix it!
-
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
@rob0203 said in Is there a update or hotfix coming?:
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
Regarding the clutter issue, this is in an FAQ about invisible models - ie they are in the schedule but not there or you are seeing gates move with no planes. Might be worth 'de-culttering' via Traffic not, GSX and see what transpires.
**FS Traffic aircraft models may be invisible, and the simulator may hang on exit if the simulator’s maximum object count has been exceeded. This may occur if you are using highly detailed third-party airport sceneries or airport ground service add-ons (such as cones, people, stairs etc.) which add clutter to airports These products greatly increase the object count within the simulator and, in extreme circumstances, may exceed the MSFS maximum object count limit.
In an attempt to reduce object count within the simulator, we have included a tool in the Traffic Control Centre that allows you to customise which ground services interact with the FS Traffic aircraft models. In the Traffic Control Centre, go to Aircraft Manager > Ground Services and there you can toggle ON/OFF the various pieces of ground equipment. The more ground equipment enabled, the higher the object count. Three presets are also available on the left side of the page to allow you to quickly change these ground services. **
-
@rob0203 said in Is there a update or hotfix coming?:
So now I landed now there is a lot of aircraft at the gates, but not a single one is taxiing.
I have only default scenery with GSX, but in GSX I unchecked the ground clutter option, so that should not be a issue anymore.
Regarding the clutter issue, this is in an FAQ about invisible models - ie they are in the schedule but not there or you are seeing gates move with no planes. Might be worth 'de-culttering' via Traffic not, GSX and see what transpires.
**FS Traffic aircraft models may be invisible, and the simulator may hang on exit if the simulator’s maximum object count has been exceeded. This may occur if you are using highly detailed third-party airport sceneries or airport ground service add-ons (such as cones, people, stairs etc.) which add clutter to airports These products greatly increase the object count within the simulator and, in extreme circumstances, may exceed the MSFS maximum object count limit.
In an attempt to reduce object count within the simulator, we have included a tool in the Traffic Control Centre that allows you to customise which ground services interact with the FS Traffic aircraft models. In the Traffic Control Centre, go to Aircraft Manager > Ground Services and there you can toggle ON/OFF the various pieces of ground equipment. The more ground equipment enabled, the higher the object count. Three presets are also available on the left side of the page to allow you to quickly change these ground services. **
-
Yes I have read all the faq
Also tried already all the options and reinstalled GSX and activated special low clutter modus in GSX.
Tried in Fstraffic with both no ground services and no services.
@rob0203 said in Is there a update or hotfix coming?:
Yes I have read all the faq
Also tried already all the options and reinstalled GSX and activated special low clutter modus in GSX.
Tried in Fstraffic with both no ground services and no services.
Odd. Just checking - have you tried some other airports? This is defintely one for support.
-
@rob0203 said in Is there a update or hotfix coming?:
Yes I have read all the faq
Also tried already all the options and reinstalled GSX and activated special low clutter modus in GSX.
Tried in Fstraffic with both no ground services and no services.
Odd. Just checking - have you tried some other airports? This is defintely one for support.
-
So now I came home ater work and will try KJFK again, just to see if the same happens after also a MSFS update
@rob0203 said in Is there a update or hotfix coming?:
So now I came home ater work and will try KJFK again, just to see if the same happens after also a MSFS update
I'd be tempted to try somewhere like Dublin or Hong Kong and turn down the objects using the FS Traffic tool.
In the Traffic Control Centre, go to Aircraft Manager > Ground Services and there you can toggle ON/OFF the various pieces of ground equipment. The more ground equipment enabled, the higher the object count. Three presets are also available on the left side of the page to allow you to quickly change these ground services.
This might be a red herring, of course. Support will probably be able to offer some more constructive help when they get to your ticket.
-
@rob0203 said in Is there a update or hotfix coming?:
So now I came home ater work and will try KJFK again, just to see if the same happens after also a MSFS update
I'd be tempted to try somewhere like Dublin or Hong Kong and turn down the objects using the FS Traffic tool.
In the Traffic Control Centre, go to Aircraft Manager > Ground Services and there you can toggle ON/OFF the various pieces of ground equipment. The more ground equipment enabled, the higher the object count. Three presets are also available on the left side of the page to allow you to quickly change these ground services.
This might be a red herring, of course. Support will probably be able to offer some more constructive help when they get to your ticket.
-
Just tested VHHH has traffic, I already have half ground services set in FSTraffic control center. Only see parked nothing taxiing or landing etc.
Now need to go to bed!
-
UPDATE a Cathay Pacific is now pushing back and taxiing!
Will test tomorrow KDEN again -
Now loading at KDEN 9:30 morning no traffic at all
When I start I load the following software: MSPopout panel manager FSUIPC Lorby AxisandOHS MFConnector SMartcars Pilot2Atc
Now trying again after PC restart without loading any of them
-
Without loading all the other software now I have traffic at KDEN and also contrails in the sky!
Will restart again with loading all of it just to check if there could be a software conflict causing this!
So no software conflicts because now I have traffic at all gates with all my addons loaded
So why does the traffic not show the first time? I has to be a software fault by FSTraffic program somewhere! Or a crash of FSTraffic I don't know
Sometimes it shows sometimes not?
-
Without loading all the other software now I have traffic at KDEN and also contrails in the sky!
Will restart again with loading all of it just to check if there could be a software conflict causing this!
@rob0203 said in Is there a update or hotfix coming?:
Without loading all the other software now I have traffic at KDEN and also contrails in the sky!
Will restart again with loading all of it just to check if there could be a software conflict causing this!
More than likely - hence the regular exhortations to raise support tickets. Going through all the threads here and in other forums, one thing seems clear in that the major issues (leading to accusations of no testing and unfinished product etc etc) are not universal and vary from PC to PC and place to place. A lot of utility-type software (and many high-end aircraft) make compromises and workarounds to get over hurdles placed by the host sim. Unfortunately, these workarounds can then conflict with each other and even if one tests program X with program Y, you may find that X won't work on one customer's PC because they have program Z installed. Z works with X. Also, Y works with X. But... X, Y and Z don't and no beta tester had this specific combination.
-
@rob0203 said in Is there a update or hotfix coming?:
Without loading all the other software now I have traffic at KDEN and also contrails in the sky!
Will restart again with loading all of it just to check if there could be a software conflict causing this!
More than likely - hence the regular exhortations to raise support tickets. Going through all the threads here and in other forums, one thing seems clear in that the major issues (leading to accusations of no testing and unfinished product etc etc) are not universal and vary from PC to PC and place to place. A lot of utility-type software (and many high-end aircraft) make compromises and workarounds to get over hurdles placed by the host sim. Unfortunately, these workarounds can then conflict with each other and even if one tests program X with program Y, you may find that X won't work on one customer's PC because they have program Z installed. Z works with X. Also, Y works with X. But... X, Y and Z don't and no beta tester had this specific combination.
-
So now a few PC restarts and sometimes traffic is there sometimes not at KDEN same airport same time same plane same software configurations
