Unable to use PMS50 GTN750

[neinnunb]

I can confirm that the hot-fix works for me, and yes, I have the bundle. Thanks for resolving this quickly over the weekend!

[davenicoll]

I have just downloaded and installed the latest update on the Warrior for MSFS 2024

I yse the TDS 750 and confirm it is not an option in the tablet, the same as the PMS issi

[Mark]

Could you confirm if you have the TDS GTNXi or TDS GTNXi Pro installed? As I believe only the latter is compatible with MSFS 2024.

Mark - Just Flight

[tarepy]

@Martyn It seems that the links for PMS GTN750 are dead. Can you activate them again?

[Mark]

@tarepy The links to the fixes above are now redundant as the fixes are included in the latest updates to the PA28s. To obtain the latest updates, please download and run the latest version of the installers from your account from the place of purchase.

Arrow III (0.11.2): https://support.justflight.com/en/support/solutions/articles/17000115071-pa-28r-arrow-iii-msfs-changelog

Turbo Arrow III/IV (0.6.2): https://support.justflight.com/en/support/solutions/articles/17000117209-pa-28r-turbo-arrow-iii-iv-msfs-changelog

Warrior II (0.4.2): https://support.justflight.com/en/support/solutions/articles/17000118189-pa-28-161-warrior-ii-msfs-changelog

Mark - Just Flight

[tarepy]

@Mark Thank you for your reply. I've purchased PA28s yesterday and still suffer from flickering of GTN screens. I'll check my circumstances again.

[Mark]

Flickering GPS displays are not something I have seen reported with the PA28s, but it could be caused by several factors. I would recommend trying the following:

• Check that you have the latest version of the PMS GTN750 installed. If you're unsure which version you have installed, delete the PMS50 GTN750 folder from your Community folder and download and install a fresh copy of the latest version from the PMS50 website.
• Check for any control assignment conflicts that could be constantly triggering a switch in the cockpit. In particular, I would recommend checking any "BATTERY", "ALTERNATOR" and "AVIONICS" control assignments.
• If the above two points don't yield any results, I would recommend uninstalling/reinstalling the Turbo Arrow.
• If the issue then still persists, can I kindly ask you to raise a ticket with Just Flight Support at the following link, and our support team will be able to assist with further troubleshooting: https://www.justflight.com/support

Hope that helps.

Mark - Just Flight

[tarepy]

@Mark I've found incorrect settings of my throttle device (Engine switches). Now, PA28s works perfect. Thank you for your kind instruction.

[davenicoll]

I have the TDS 750 GTNXI pro installed.

[Mark]

@davenicoll I would recommend following the steps outlined in my reply here to see if that gets you up and running: https://community.justflight.com/post/36544

If the issue persists, could I kindly ask you to contact Just Flight Support via the following link, and our support team will be able to assist with further troubleshooting: https://www.justflight.com/support

Mark - Just Flight