Brakes not working in MSFS 2024

MatzeH84

Experienced this the first time today. GSX used "lift for pushback" for the first time on the V2, before that on all flights a small tug was used. I also noticed that I got no callouts on takeoff and also no audio from the cabin crew after that.

asoshkin

It happened to me twice so far.

Mark

As an update to this, we do have a fix that is currently being tested by our beta team. Once that has been signed off the fix will be included in the upcoming update to the F28 Professional.

Mark - Just Flight

Jasemelbo

Just to confirm that I have the same issue

Jasemelbo

From a few tests, it looks like its an issue with GSX integration.

If I only use the pushback request from GSX and deselect GSX integration from the settings menu on the tablet, brakes work each time.

MatzeH84

Issue is back after SU2, sitting here at the gate and the plane keeps on rolling after engine start, toe brakes and parking brake do not stop it.. hydraulic pressure is ok, issue remains if pumps are manually on. No brake pressure shown on the left gauges, pedals (to brakes) are moving. GSX integration selected, but have only done boarding with it, nothing more.

Mark

@MatzeH84 I've just had a look at this and I'm not able to replicate this behaviour using F28 v0.2.1 and SU2 at the moment.

If the System I hydraulic pressure indicator is indicating 0 PSI, it would be expected that the brakes do not function, as there is no pressure in the system. With the engines shutdown, System I brake pressure will be depleted every time the toe brakes are applied, but with the engines running, the pressure should be maintained in the green band range if all of the hydraulic pumps switches are in the NORMAL positions.

If that occurs again, would you be so kind as to attach a screenshot or video of the behaviour so we can see if we can spot anything abnormal?

Mark - Just Flight

MatzeH84

Will do. Engines were running, hyd pressure in the green.
Sim restart fixed the issue. I unchecked GSX integration for now.

Astrogator

Had the same issue not only with the breaks but also with all controls I have connected to Hardware (Thrust Lever, Spoiler etc)
Figured out it happens when I have navigraph open in a dedicated window and the focus is in that window. So clicking somewhere in the cockpit to get focus back on the plane it works fine again

MatzeH84

@Astrogator good find, but does not apply in my case.