2024 ND + GNLU Blank Screens
-
2024 ND and GNLU blank screens. Any ideas?
JW
-
Same issue. Restarted 2024 and no changes.
-
@whitakerjl I'll try the same. Did you restart with the same variant on the runway or different each time?
I did update nav data through hub prior to first flight. Maybe that could be the stem of this?
Justin
-
@justinm-msfs I changed aircraft variant and livery several times. My NAVDATA was also updated- but not before first load.
JW
-
M Martyn referenced this topic on
-
Update. Can confirm after doing what @whitakerjl did i also have sucess now. I just started flights with all variants on runway. After all three did their own first load afterwards the issue was resolved.
Justin
-
@justinm-msfs intermittent for me. After closing simulator and restarting the screens were blank again. Had to reload the aircraft to get screens.
JW
-
Yeah It has to do something with cold start option. Displays only show up when you start on runway with everything running.
-
First of all, thank you JF for bringing us the RJ100 to FS24. Oh how I have missed this aircraft!
I am having the same issue (if we're talking about the two displays immediately in front of the pilots). My screens remain off when I turn on the aircraft's power and electrics, if I am starting Cold and Dark at the gate.
The only way I have found around this if I want to start C&D at the gate is to start the aircraft up as usual, but when I am ready to taxi I select READY FOR TO in the tablet, which then turns on the remaining systems, i.e., the primary displays.
Edit: I did reboot the game but that did not resolve the issue either. As mentioned above the only way to get the screens on when starting cold and dark was to select READY FOR TO in the tablet.
I'll try again tomorrow when I plan to make another flight.
-
Inconsistencies with the WASM compiling are something we have listed in our "RJ Professional - MSFS 2024 Known Issues" FAQ (point 1): https://support.justflight.com/en/support/solutions/articles/17000143831-rj-professional-msfs-2024-known-issues
From our testing, this will likely be apparent until the WASM gauge has successfully compiled, usually after a second load of the aircraft. The most efficient way of ensuring the WASM file compiles successfully is:
- Install the RJ Professional (MSFS 2024)
- Load a flight in one of the RJ variants on the runway. You'll likely notice that the engines will shut down immediately and/or the IRS's will not be aligned.
- Return to the MSFS 2024 Main Menu and select a different RJ variant (if you first loaded in the RJ70, load into the RJ85 on this second flight).
- Load this second flight on the runway again and the RJ should load in with a "Ready For Takeoff" state.
Alternatively, simply restarting MSFS 2024 after the very first load in the RJ should also resolve this issue the next time the simulator launches.
Once the WASM gauge has successfully compiled, all future flights should load without issues, however, this process may be required every time the product is reinstalled/updated (or may not be required at all depending on future MSFS 2024 patches/sim updates or if we can find a more reliable method).
If you continue to have issues with the RJ refusing to load in MSFS 2024, please open a ticket with our support team via the following link and we can investigate this further: https://www.justflight.com/support
Mark - Just Flight
-
-
-
@Godwisper Please contact our support team: https://community.justflight.com/topic/7105/product-support
-
@Godwisper same for me. the RJ 70 works fine though for me just the 85 and 100 that doesnt
-
I tried everything i could yesterday, followed the steps in the FAQ, tried clearing the appdata folder, did the reinstall multiple times and had mixed results each time. On the last test, everything seemed to be working, then i updated NavData from the NavigraphHub and installed FSUIPC7 back into its folder and it didnt work again, so i guess ill try uninstalling those two things now to see if it comes back.
It seems like the steps above in the faq work but then when you load in cold and dark it doesnt work again for the majority of time, and reinstalling the aircraft doesnt help, where are the files kept so we can delete them and try again?
-
I gave up and bought this morning. Hope it gets fixed soon :/
Worked only twice and while on the runway. Tried cold and dark and again nothing neither on runway. If developers got this working is it an incompatible third party app that is conflicting ? I don’t think update came out without checking as aircraft is unflyable on ms2024 as this is not a GA aircraft :)
I removed msfs2020 as I fly only in VR and it is working well with new sim and the PCL.
