Tail VHF Antenna Still Displays w/ Aerial Disabled
-
Thanks for reporting this. We've found the cause and will address that in the next update.
In the meantime you can fix that by moving this file into this folder, replacing the existing one: \SimObjects\Airplanes\JF_146_100\model\
-
Same for HF Aerials. Always visible, independent from the EFB setting.
I only tested with the -100 variant. -
@Friese2020
Add the following lines to the named file:<Component ID="HF_aerials_LOD0" Node="LOD0_HF_aerials"> <Visibility> <Parameter> <Code>(L:HF_aerials, number)</Code> </Parameter> </Visibility> </Component>
-
@Martyn said in Tail VHF Antenna Still Displays w/ Aerial Disabled:
Thanks for reporting this. We've found the cause and will address that in the next update.
In the meantime you can fix that by moving this file into this folder, replacing the existing one: \SimObjects\Airplanes\JF_146_100\model\
Should this temporary file be addd to the 200 and 300 directory as well? It seems to have fixed the 100, yes. Thanks.
-
@Friese2020 said in Tail VHF Antenna Still Displays w/ Aerial Disabled:
@Martyn And also on the -300 variant the VHF antenna is always visible. Independent from the EFB selection.
Probably more variants have the same (minor) "problem".Same with v2.1. Disabling the VHF antenna seems to have no affect still. (-300 pictured below)
Or is it intended this antenna is "permanent" on certain variants?
Thanks.
-
@CaptKornDog Same here. Very minor "problem". Only here to confirm.