No traffic at destination. Again and again.
-
@bpfonteyn I have tried addilng unlisted airports to the database, and while they then show up in the Traffic Control Centre to schedule flights, they don't work in the sim. JF support informed me that there would be modifications to allow adding airports and also a bug fix to stop FS Traffic from crashing when these airports were involved.
-
@jf-john YSSY was good with the compatibilty change, but YBBN still would not work, and OMDB, that ones a must as emirates have the most 380,s of any fleet I knocked the 744 and 388 down in the cfg file, sometimes those aircraft do show squeezed in, but it's a compromise that I'm happy to live with.
@hunterdouglas The largest gate radius at YBBN is just under 60 feet which seems typical for AI generated airports. 110ft seems to be the sweet spot for the 747 so I'll use this as the third option for all aircraft 757-200 and bigger.
John - Just Flight.
-
@hunterdouglas The largest gate radius at YBBN is just under 60 feet which seems typical for AI generated airports. 110ft seems to be the sweet spot for the 747 so I'll use this as the third option for all aircraft 757-200 and bigger.
John - Just Flight.
@jf-john That sounds perfect, thank you
-
What has actually helped - and I am not using the latest update of V 1.0.6 yet - is that I only input the destinatio via CONFIRM shortly before takeoff and also set my destination before in the MSFS „From/To“ menu. This has worked 100%. But agree not ideal…
-
Using 1.6 (official), I had another no-traffic-at-destination event yesterday.
I entered the ICAO in the field (FST window) but noticed during approach that while the destination airport was normally shown in the field during flight, it had vanished at some point in time, with the skies and airport then just being empty. Feels like something is crashing ... idk.Still an unreliable system unfortunately. Will keep trying though....
-
Using 1.6 (official), I had another no-traffic-at-destination event yesterday.
I entered the ICAO in the field (FST window) but noticed during approach that while the destination airport was normally shown in the field during flight, it had vanished at some point in time, with the skies and airport then just being empty. Feels like something is crashing ... idk.Still an unreliable system unfortunately. Will keep trying though....
-
@disco79stu Hello,
Could you tell me what you departure and destination airport was? That way we can try to replicate.
John - Just Flight.
@jf-john this was LIPY (bmw) - LFPO (jetstream)
-
Hello,
destination traffic worked fine under version 1.0.5 before. I set the destination airport within the FS Traffic menu outside MSFS.
Unfortunately, with version 1.0.6 this option outside MSFS does not exist anymore.
So, I set the destination once when setting up the flight in MSFS (departure and destination airports) and then I set the destination again within MSFS using the in-build FS Traffic menu.
Unfortunately, there was no traffic at the destination. So, I de-installed version 1.0.6 and installed prior version 1.0.5 again and everything works well there.
For your reference, it was a flight from LSZH to EDDB. -
And again arrived at LIMJ from LFPO, with plenty of traffic on departure but practically none en route with zero at the destination. Destination filed correctly showed LMIJ.
Why is it even necessary to have this btw? Can't the system just spawn aircraft according to schedule by distance or something? Like every other traffic add on ever did? -
And again arrived at LIMJ from LFPO, with plenty of traffic on departure but practically none en route with zero at the destination. Destination filed correctly showed LMIJ.
Why is it even necessary to have this btw? Can't the system just spawn aircraft according to schedule by distance or something? Like every other traffic add on ever did?@disco79stu Hello, I just did that same flight to test. No problems here.
Traffic at the departure airport, traffic during the entire route (not too much, although I guess it depends on the day and time) and traffic at the destination airport. Little, but everything according to the Schedules Manager of the FS Traffic Control Center for the arrival time.
FS Traffic version 1.0.6.
I am attaching some sample screenshots from different moments of the flight.
-
just to be sure, what should the airport vehicle density slider be set at?
-
just to be sure, what should the airport vehicle density slider be set at?
@disco79stu I now have it set to a value of 10.
According to the manual you can put any value between 1-100. -
well, still can't makes sense of this.
I keep trying but it's just not working somehow. Just departed from LFQQ with one AI parked. So far so good, it's a small airport. Now I reached my cruising altitude and I haven't seen any other aircraft on TCAS so far, while I even overflew LFPG. It's just empty out there (compared to FSLTL, where I always see one or two aircraft once in a while).
I'm heading for LEBL, but I kinda already expecting to just arrive at an empty airport.... we'll see.
No Idea what else I can try at this point.Edit: okay, saw no traffic in the air or during approach BUT barcelona was populated with parked and moving planes :) fingers crossed...
