No Traffic
-
@blackrat said in No Traffic:
@derek Thanks, I've left a support ticket.
An idea from another post suggested that deleting the modules folder may help. I actually renamed it an run MSFS and I got traffic, no moving traffic of course as the pln files were no longer there but plenty of parked aircraft. I then rebooted, changed the name of the modules folder back and run MSFS again. Now it seems to be working fine. Fingers crossed...
EDIT: I spoke too soon it seems. I came out of one flight and loaded another at a different airport. Again - no traffic. Also if I now try to return to the MSFS main screen it just sits there an refuses. I ended up having to Alt-F4 out of it.
I had experienced exactly the same problem - no traffic and a hanging MSFS when returning to the main screen. Then I have cleared my Community-folder followed by inserting all FSTraffic-folders. Afterwards I have got traffic, and I was able to return to the main screen.
Now I adding all my sceneries and utils back into the Community-folder step by step.
It looks like that one certain object in the Community-folder has caused the problem, at least I hope so.
Patric
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder.. -
@777dave Close MSFS. Navigate to C:\Users<YourUserName>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages
Then delete everything in the "justflight-fstraffic-module" folder.
Start MSFS and it will rebuild those files and should work properly.
@mookie2661
Do you have Microsoft version installed? Asking because I have STEAM version and my "justflight-fstraffic-module" folder is in the Comunity folder and NOT %appdata% folder. -
@mookie2661
Do you have Microsoft version installed? Asking because I have STEAM version and my "justflight-fstraffic-module" folder is in the Comunity folder and NOT %appdata% folder.@anacrusis Yes, sorry. I should have clarified that. This is where it is for the MS Store version.
-
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder..@dude said in No Traffic:
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder..I suspect that GSX Pro could be a possible reason for the problem. I own it too. At the moment this tool is not installed on my system, and I can see traffic.
You need to wait at least 10 minutes to see traffic moving.
Patric
-
@dude said in No Traffic:
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder..I suspect that GSX Pro could be a possible reason for the problem. I own it too. At the moment this tool is not installed on my system, and I can see traffic.
You need to wait at least 10 minutes to see traffic moving.
Patric
-
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
@qazme said in No Traffic:
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
Thanks for the information. I must have overlooked this option.
Patric
-
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
-
@anacrusis Yes, sorry. I should have clarified that. This is where it is for the MS Store version.
@mookie2661 Thanks for the update
-
@dude said in No Traffic:
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder..I suspect that GSX Pro could be a possible reason for the problem. I own it too. At the moment this tool is not installed on my system, and I can see traffic.
You need to wait at least 10 minutes to see traffic moving.
Patric
-
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
-
@pscharff I tried unlinking it and did not see a change..if this interferes with GSX, I will definitely have an issue with that
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Followed instructions. Installed program, entered ICAO code when I spawn in, but when I hit confirm, no planes show up at all. I have tried reinstalling the program and restarting the computer and simulator multiple times. Would be nice to be able to use this program as this is my only day off for 18 days
-
Same here, no traffic, I have tried everything! Uninstalled, installed, opened as administrator, cleared MSFS cache, followed all recommendations and solutions proposed above, not to mention the software errors in the "traffic control center." I have of course opened a ticket with support to request the repair of the addon so that it works and we can use our purchase, or a refund if it is unusable!
ticket: #69607
-
I have GSX Pro and I have found then when I spawn on the runway I have traffic, when I spawn at the gate/parking I don't have traffic.
At the moment my work around is to spawn on the runway then use GSX Pro to then warp me to an available gate/parking and the traffic still remains. :man_shrugging_medium_skin_tone:Also FS Traffic clashes with Flight Control Replay, causing CTD. I had to remove 'flightcontrolreplay-ingamepanels-custom'' from the community folder, then it loaded with no traffic, then realised GSX Pro was the next problem
-
Same here, no traffic, I have tried everything! Uninstalled, installed, opened as administrator, cleared MSFS cache, followed all recommendations and solutions proposed above, not to mention the software errors in the "traffic control center." I have of course opened a ticket with support to request the repair of the addon so that it works and we can use our purchase, or a refund if it is unusable!
ticket: #69607
-
@qazme said in No Traffic:
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
Thanks for the information. I must have overlooked this option.
Patric
