No Traffic
-
@mookie2661 said in No Traffic:
@derek Thanks. I will wait until the update since I can't repeat it at the same airport. If problems persist, I will submit a ticket.
Edit: I have unlinked GSX from my community folder again and FST worked when I loaded into Payware KMEM and EGLL. also spawned aircraft at default KBNA. Don't have time for a full flight but will report back if there are more snags.
Have you used the FST tool to reduce clutter? With that you shouldn't have to remove GSX or different airport scenery.
-
@derek Yes. I have reduced is as low as it can go.
@mookie2661 said in No Traffic:
@derek Yes. I have reduced is as low as it can go.
OK - see John's post above - the update should make a difference.
-
@mookie2661 The update is out now. Destination traffic should now be much more consistent. The maximum object issue still exists but we've made a few changes to help.
John - Just Flight
@jf-john Thanks, John. Won't be able to test for another 13 hours, but will surely report back.
-
@mookie2661 said in No Traffic:
@derek Yes. I have reduced is as low as it can go.
OK - see John's post above - the update should make a difference.
@derek Didn't work for me. No destination traffic at all. The original installer worked! This one just broke it. I have submitted a ticket, but this is just getting frustrating
-
Just starting a flight EGNS-EGLL.
No aircraft at EGNS as it stands. I have traffic spawn timing set to 120 minutes.
According to FlightRadar there is an EasyJet A320 due to depart at 1215, and a Loganair AT76 due to depart at 1225. I would have expected to see these aircraft in game. I’ve been loaded in for about 10-15 minutes so far. It’s currently 1050z as I type this.
Another aircraft is due to depart at 1300, so I’m going to hang about here until after 1100 to see if it spawns in.
There are no arrivals due until 1145, so I’m not expecting to see any landings.
My destination is EGLL, which has been set in the JF toolbar icon window.
Note: I do acknowledge that the JF timetables were correct as of summer 2022, so it’s possible there has been winter changes to the real life schedules.
I’m probably going to try a flight later using MSFS Live Traffic, disabling JFT timetables (but allowing JFT to populate the game with its aircraft models).
-
Just starting a flight EGNS-EGLL.
No aircraft at EGNS as it stands. I have traffic spawn timing set to 120 minutes.
According to FlightRadar there is an EasyJet A320 due to depart at 1215, and a Loganair AT76 due to depart at 1225. I would have expected to see these aircraft in game. I’ve been loaded in for about 10-15 minutes so far. It’s currently 1050z as I type this.
Another aircraft is due to depart at 1300, so I’m going to hang about here until after 1100 to see if it spawns in.
There are no arrivals due until 1145, so I’m not expecting to see any landings.
My destination is EGLL, which has been set in the JF toolbar icon window.
Note: I do acknowledge that the JF timetables were correct as of summer 2022, so it’s possible there has been winter changes to the real life schedules.
I’m probably going to try a flight later using MSFS Live Traffic, disabling JFT timetables (but allowing JFT to populate the game with its aircraft models).
I’m still at EGNS and no aircraft have spawned in. Whilst the game is still running in the background I have opened JF Traffic Control Centre to look at EGNS departures for a Saturday.
As suspected the JF timetable is different to real life (hence why FlightRadar does not reflect what is spawning in game). However, as above, I acknowledge timetables change, and JF’s is set as of summer 2022.
Saying that though, the JF timetable tells me I have one flight departing at 1220 for EGLL. It’s currently 1114 both in game and in real life. As my Time Before Departure Value in TCC is set to 120 minutes, I would have expected to see this flight at the gate. Nothing there unfortunately.
The next flight in JF timetable is 1400, so I won’t expect to see that spawn in until 1200, 45 minutes from now. I’m not going to hang around for that, so I’m now going to depart for EGLL. I think it’s an hour flight. Hopefully I’ll see something at EGLL. 🙂
-
Hi
With the new update there is no different for me. Sometimes it works, sometimes not. Depature works most, enroute less traffic or nothing. on arrival nothing or it works.
Today from OIAW to LLBG. NOTHING. No traffic enroute, not one single plane in Ben Gurion. For sure settings as per manual. No different with Vanilla airport or 3th part.
But best performance with no traffic...:face_with_rolling_eyes:
Realy, this software needs a re-build or a magic update. Simple it doesn't work.
Max
-
I’m still at EGNS and no aircraft have spawned in. Whilst the game is still running in the background I have opened JF Traffic Control Centre to look at EGNS departures for a Saturday.
As suspected the JF timetable is different to real life (hence why FlightRadar does not reflect what is spawning in game). However, as above, I acknowledge timetables change, and JF’s is set as of summer 2022.
Saying that though, the JF timetable tells me I have one flight departing at 1220 for EGLL. It’s currently 1114 both in game and in real life. As my Time Before Departure Value in TCC is set to 120 minutes, I would have expected to see this flight at the gate. Nothing there unfortunately.
The next flight in JF timetable is 1400, so I won’t expect to see that spawn in until 1200, 45 minutes from now. I’m not going to hang around for that, so I’m now going to depart for EGLL. I think it’s an hour flight. Hopefully I’ll see something at EGLL. 🙂
-
Just starting a flight EGNS-EGLL.
No aircraft at EGNS as it stands. I have traffic spawn timing set to 120 minutes.
According to FlightRadar there is an EasyJet A320 due to depart at 1215, and a Loganair AT76 due to depart at 1225. I would have expected to see these aircraft in game. I’ve been loaded in for about 10-15 minutes so far. It’s currently 1050z as I type this.
Another aircraft is due to depart at 1300, so I’m going to hang about here until after 1100 to see if it spawns in.
There are no arrivals due until 1145, so I’m not expecting to see any landings.
My destination is EGLL, which has been set in the JF toolbar icon window.
Note: I do acknowledge that the JF timetables were correct as of summer 2022, so it’s possible there has been winter changes to the real life schedules.
I’m probably going to try a flight later using MSFS Live Traffic, disabling JFT timetables (but allowing JFT to populate the game with its aircraft models).
-
@mookie2661 said in No Traffic:
@derek Yes. I have reduced is as low as it can go.
OK - see John's post above - the update should make a difference.
@derek I had 2 successful flights last night with the update. I still have GSX unlinked, but will try to link it again tonight. I have still been clearing the packages folder before each flight.
-
@bpfonteyn FS Traffic doesn't use FR24. It uses its own database from Summer 2022.
@mookie2661 said in No Traffic:
@bpfonteyn FS Traffic doesn't use FR24. It uses its own database from Summer 2022.
I know. I checked the built-in flight plan database, and it was different than FR24.
-
@mookie2661 said in No Traffic:
@bpfonteyn FS Traffic doesn't use FR24. It uses its own database from Summer 2022.
I know. I checked the built-in flight plan database, and it was different than FR24.
@bpfonteyn my bad.
-
@derek I had 2 successful flights last night with the update. I still have GSX unlinked, but will try to link it again tonight. I have still been clearing the packages folder before each flight.
@mookie2661 for whatever it's worth I've been using GSX and it's been totally fine. The one exception is in the FST control center I made ground traffic only use ramps and gates. This will help avoid the draw issue best I can without sacrificing all the visuals totally. I can ignore baggage and push equipment, but I want gates!
-
@JohnG1 nobody is being given the runaround. The support team need to work with customers having issues to ascertain the problem they’re having, so that fixes can be made where required.
There are a vocal minority of users that have encountered issues, as can be seen here on the forum, and you’re entitled to air your grievances. However, recommending people bypass proper procedure and defamatory language will not be tolerated.
-
@mookie2661 for whatever it's worth I've been using GSX and it's been totally fine. The one exception is in the FST control center I made ground traffic only use ramps and gates. This will help avoid the draw issue best I can without sacrificing all the visuals totally. I can ignore baggage and push equipment, but I want gates!
@qazme Yep! I'm sure what in the the last update fixed it for me, but it appears to be working fine. On my 3rd flight. GSX and basic gate equipment.
-
This is a bad joke!
Never seen my home airport Frankfurt that empty with so few movements!
Regardless which configuration switches I change, which date and time I set. how long I wait with my energy consuming graphics card until FS Traffic is considering to do anything, always the same result.Very very disappointing! I do think there's a basic conceptual wrong decision in the product.
I want a refund and will go back to FSLTL. -
This is a bad joke!
Never seen my home airport Frankfurt that empty with so few movements!
Regardless which configuration switches I change, which date and time I set. how long I wait with my energy consuming graphics card until FS Traffic is considering to do anything, always the same result.Very very disappointing! I do think there's a basic conceptual wrong decision in the product.
I want a refund and will go back to FSLTL.@ab-stromer said in No Traffic:
This is a bad joke!
Never seen my home airport Frankfurt that empty with so few movements!
Regardless which configuration switches I change, which date and time I set. how long I wait with my energy consuming graphics card until FS Traffic is considering to do anything, always the same result.Very very disappointing! I do think there's a basic conceptual wrong decision in the product.
I want a refund and will go back to FSLTL.Default Frankfurt or 3rd party?
-
Default airport scenery!
-
@ab-stromer said in No Traffic:
This is a bad joke!
Never seen my home airport Frankfurt that empty with so few movements!
Regardless which configuration switches I change, which date and time I set. how long I wait with my energy consuming graphics card until FS Traffic is considering to do anything, always the same result.Very very disappointing! I do think there's a basic conceptual wrong decision in the product.
I want a refund and will go back to FSLTL.Default Frankfurt or 3rd party?
