146 engines fail starting Missions

[keithb77]

I'm trying to create Missions for the 146 (I've got quite a few for other aircraft posted at flightsim.to) but the 146 enters the mission in a 'broken' state.
Typically all 4 engines are at maximum (9999 on the gauges) and quickly spool down to 0 with no hydraulic pressure (so no gear or flaps). This happens with either the Cruise.flt or Finals.flt file selected in the mission.
Throttles have no effect.
Using the Approach.flt file the engines stay at maximum overboost, in which case the fuel can be cut and a 'dead-stick' landing made :)

I suspect its something to do with uninitialised variables...any thoughts?
Cheers
Keith

[keithb77]

@keithb77 Seems to work most reliably with the runway.flt file and starting mission with hardware throttle NOT at idle