Single GNS 430 like the Arrow III
-
Dear all,
I am really satisfied with the Warrior II. However as I bought a GNS 430 from Realsimgear (for real world training), I was wondering why the Warrior II doesn't have an option to fit a single GNS 430, like in the Arrow III as I saw on the product page.
I tried using the GNS 530/430 combination and set everything to com 2, but that does not work for nav.
Will this be implemented, or is it already possible without me knowing?
Thanks!
rsijbring
-
@rsijbring said in Single GNS 430 like the Arrow III:
I tried using the GNS 530/430 combination and set everything to com 2, but that does not work for nav.
What doesn't work about it?
-
@jmarkows I just couldn't get the nav 2 frequency from the GNS 430 on the HSI, by changing the source (Is that possible?). I could only put it on the bottom right nav 2 instrument.
-
@rsijbring I only use the DG because I'm a masochist, but have you tried switching the nav source from Nav 1 to Nav 2, like you would for the autopilot? I forget exactly where the switch is in the Warrior, might be near the autopilot.
-
@jmarkows Ive just tried it, there is a three way switch with the top labelled with NAV 1. However, the HSI does not change when flipping it. The right NAV 1 and NAV 2 dials do show their respective VOR.
-
@rsijbring I just opened the manual to confirm the switch location. You tried toggling the switch directly next to the autopilot panel, and not the DME selector on the top left panel, correct?
-
@jmarkows Yes that is correct, the switch between the autopilot panel and the magneto selector. I tried flipping it in all three positions but no result.
-
@rsijbring ok, in that case I'd open a support ticket with Just Flight and see what they say about it.
-
@jmarkows I guess ill do that. Thanks for the help!