Plane is banking very hard to the left
my Piper Turbo Arrow III is acting very strange (and almost uncontrollable) after take of and during flight. The plane is banking very seriously to the left (almost 45°) and I have to give full aileron to the right to keep it level. Checked the calibration of my yoke (Saitek) = OK. Fuel tanks are in balans. (I haven't tried the IV to see if it has the same problem - I always fly the III).
Rudder trim is centered.
Also my navigation lights aren't working.
Can anybody provide some help/solution please?
Awaiting your replies and help (hopefully☺),
thanks for replying. I won't know because (of that) I haven't flown the Arrow since then (been flying not much in general lately). But I will give it a try and let you know one of these days.
Untill then, keep the blue side up
ps: what I did found out that time I was not the only one with this problem. More people reported it. Just info.
Yesterday, immediately after reading your reply, I took the Arrow for a flight. And, as I already suspected, the AP wasn't on, but with the same results. Re-checked all the calibrations of the yoke once more, everyting OK, but to no avail. I must turn the yoke almost 30° to the right to keep the wings level.
I totally agree, the PA-28 Turbo Arrow is a very nice plane to fly, was a nice plane to fly. My favorite GA at the time. That's why it is so sad that things don't work as they should.
You mention a new SU 10 update, is that an update for the Arrow in Xplane11? Can you tell me something about that please?
This is the repaint I did on my Arrow III
Hello again Rom,
on the JUST FLIGHT website they mention an PA-28 R for XP 11 now. Is this that updated Arrow, and if so, where can I get it. I bought my Arrow at The Flightsim Store at the time, but as far as I know, that doesn't exist anymore (I can no longer go there for an update). I purchased it in January 2018, ordernumber: FSS 563708.
Awaiting your reply,
I'm back, ☺
according to my xOrganizer I have the v 1.8 version of the arrow, and version v1.9 is out now. I found this on the Just Flight website: https://support.justflight.com/support/solutions/articles/17000068631-pa-28r-turbo-arrow-iii-iv-xp11-changelog
At the bottom of the page I found this:
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
But my Arrow isn't in "My Orders" of my account because I bought my arrow elswhere.
I re-downloaded en re-installed my Arrow already months ago but that didn't solve the problem at the time. Just to let you know.