Warrior & Arrow autopilot with DG not set correctly
-
Btw, I just realized that I'm always using the HSI instead of the DI. The HSI, to my knowledge, does not have drift, but the DI probably can drift.
Yes I probably should have pointed that out in my first post. The HSI is the default and doesn't drift as it has it's own heading source and I imagine most people use that (since it is default + has more functionality) but I use the DG since that's what I have when I fly IRL. It does drift, and the autopilot functionality does not seem to work correctly when it drifts.
Thanks for your input. I am convinced now that this is most likely a bug so I'll report it
-
I use DG exclusively as well, and I haven't really seen any issues with the autopilot following the heading bug in heading mode. But I haven't paid that close attention since SU5, and where I've been flying the winds have been very light, so it may be an issue if I get more of a crosswind. And the heading does drift a bit, I use the whisky crosscheck and the heading set to make sure it's on the correct heading before using heading mode.
-
Yes I probably should have pointed that out in my first post. The HSI is the default and doesn't drift as it has it's own heading source and I imagine most people use that (since it is default + has more functionality) but I use the DG since that's what I have when I fly IRL. It does drift, and the autopilot functionality does not seem to work correctly when it drifts.
Thanks for your input. I am convinced now that this is most likely a bug so I'll report it
@nickd27 I re-read your original question. Initially I understand the phrase "activate the autopilot on heading mode the plane will continue straight" as pertaining to the expected behavior. But do I understand correctly that this is would you observed? This would mean that the autopilot is based on actual heading in stead of indicated heading. That would certainly be a bug.
-
I use the whisky crosscheck and the heading set to make sure it's on the correct heading before using heading mode.
Yeah if you are keeping the DG aligned with the whiskey compass you wouldn't see this problem
This would mean that the autopilot is based on actual heading in stead of indicated heading
Yep that is correct. That is the issue I am reporting
I will record a video to show the error more clearly tonight and post it here
-
Timestamps and descriptions of what I am doing are in the video description. I hope this helps to explain the issue
-
Timestamps and descriptions of what I am doing are in the video description. I hope this helps to explain the issue
-
Yeah that's right. It is handy that the autopilot works even if the gyro has drifted but I want realism so if I forget to check the gyro for an hour I want to end up 20 miles off to the side of my desired track wondering why there isn't an airport underneath me! :P
-
@nickd27 So if you zero the DG with the whisky, then the AP follows the DG, but basically, the AP will follow the aircraft's actual heading, regardless of the DG. While it's handy to have that, it's probably not an accurate representation of the AP.
-
@katchaplin Don't forget you can disable gyro drift in the sim settings... should you wish to.
-
@gabe777 I'm not really having any issues with DG, and I like the realism of having to check the compass on a regular basis.
@katchaplin
This is controlled by a 'hdg_ref_var' value in the [AUTOPILOT] section of the systems.cfg. The default value is '0' which means the magnetic heading is used by the autopilot. Setting it to '1' means the gyro heading is used. Unfortunately there is currently no way to update that value from the gauge code so we can't change it based on whether the HSI or DI has been enabled, so we have left that value out of the cfg meaning it defaults to '0' (magnetic), as most users prefer the HSI. For now you'll have to manually add 'hdg_ref_var=1' to the cfg if you prefer the DI.
-
@katchaplin
This is controlled by a 'hdg_ref_var' value in the [AUTOPILOT] section of the systems.cfg. The default value is '0' which means the magnetic heading is used by the autopilot. Setting it to '1' means the gyro heading is used. Unfortunately there is currently no way to update that value from the gauge code so we can't change it based on whether the HSI or DI has been enabled, so we have left that value out of the cfg meaning it defaults to '0' (magnetic), as most users prefer the HSI. For now you'll have to manually add 'hdg_ref_var=1' to the cfg if you prefer the DI.
-
@katchaplin
This is controlled by a 'hdg_ref_var' value in the [AUTOPILOT] section of the systems.cfg. The default value is '0' which means the magnetic heading is used by the autopilot. Setting it to '1' means the gyro heading is used. Unfortunately there is currently no way to update that value from the gauge code so we can't change it based on whether the HSI or DI has been enabled, so we have left that value out of the cfg meaning it defaults to '0' (magnetic), as most users prefer the HSI. For now you'll have to manually add 'hdg_ref_var=1' to the cfg if you prefer the DI.
