Alternate air control lever not moving
-
@steku said in Alternate air control lever not moving:
Should It be like that? I have no experience with constant speed prop., in simple plane with fixed prop the RPM drops when carb. heat is enabled.
Turning alternate air ON does bypasses the air filter and provides heated air to the engine intake manifold, but because this engine is fuel injected, and has a constant speed prop, you won't see any change in RPM like you would with a simple carburated engine with a fixed pitch prop.
-
@retiredman93231 Is there any (noticeable) effect on manifold pressure and/or EGT?
-
@corvus5624 No, not that I am aware of. The unfiltered heated air is not really hot enough to affect the EGT. It might reduce the manifold pressure slightly, but not enough to really notice.
-
@retiredman93231 Using hot (less dense) air should in principle reduce engine power, as there is less oxygen in the cylinder. I was wondering if this had any effect on the engine parameters. I think it should have, but perhaps it is simply not modeled?
-
@corvus5624 You are correct, but the RPM won't change regardless, because it is being maintained by the constant speed prop.
-
-
-
@anderson
We don't release upodates for our products to a timetable. If something is broken and can be fixed, or something can be enhanced or an update to the host game means a change is required, then we will release an update. The regularity of updates bears little relation to the priority of the product. Also, I guess it depends what you mean by priority. For some of our team, the priority is for stuff that we haven't released yet. Others are working on stuff we released some years ago. -
@anderson The ticket was resolved with the understanding that the issue has been passed to the dev team to investigate and that "A fix will likely be included in the next update to the Arrow III (for MSFS)", without an ETA. That's good enough for me.
