Tornado GR.1
-
I purchased the Tornado Gr1 pack recently, but can't get Air to Air refuelling, nor the Terrain Following or radar altitude modes to work. I lodged a support request, but haven't had a reply to my latest message for over 6 weeks now.
Do these features work? Would it be possible to get my ticket replied to?
Thanks
Steve
-
Hi there
Looked through the ticket thread. I think Craig has replied today on the basis that the guy that coded the IFR is stuck on something else but will look into this asap. The problem is that it WAS working and does on some systems so it's clearly been busted by an update so will need some investigation.
Meanwhile, on the radar etc, did you get this working using the advice about Simconnect?
-
Hi Derek, What was the advice about simconnect, I have been waiting for a patch for this for nearly a year. the TFR when engaged results in the aircraft doing a dive straight into terrain and the other issue I found was that when the PLN button is pressed on the navigators screens it results in a CTD. I have raised tickets and also spoken to people at Cosford last year. I was told that a patch will follow the F-3 being released.
I hope someone will answer.
-
The F3 is a way off at the moment and not sure there is a patch planned that will do anything to TFR. Pretty sure that works.
Who did you speak to at Cosford? Also, what sim are we talking about here?If you have 'raised tickets' that suggests more than one and you say it has been more than a year but above you said you bought it recently? AFAIK the only issue we are aware of on the Tornado is something to do with in-flight refuelling that may have been busted by something else. However, from what you say it has never worked for you. Has that been for over a year? As for a CTD (that's a 'crash to desktop' for anyone reading this who is nearer to my age) that is an odd one.
There is a report here of a CTD with PLN but that went away according to the poster:
http://forum.justflight.com/forum_posts.asp?TID=31683&PN=2&title=tornado-gr1-update-for-p3d-v4
We don't have this logged as a sim problem - something to do with the user's PC unless we can get any more information. I wonder if anyone else experiences it?
This was the patch released a year ago:
-
Hi @Derek the most recent post was from a different poster, not me the OP, which is why it says different things about time scales etc.
I sadly had no joy with the simconnect fix, from what I can work out TFR seems to hold a baro altitude rather than a rad altitude, which doesn't end well when the terrain changes. When TFR is holding a fixed altitude (which appears to be in relation to baro height) there is a constant trim oscillation back and forth.
From reading through posts on the old JF forum, problems with the TFR seem to have been there for a long time (possibly since release? ) e.g. forum.justflight.com/forum_posts.asp?TID=32026&PN=1&title=a-couple-of-issues-with-v4.
I've been offered a refund when heard back from support, but will stick with the product as much of it is great. However, it would be amazing to have a working TFR as featured in the advertising. Perhaps it is just a problem with my PC (should be building a new one in the next few weeks)? It would be great to know if anyone at JF can operate TFR successfully and post a video up so I can see what should be happening.
Best wishes
Steve
-
-
The TFR is a bit of a bodge - always was on the old RAF Tornado. I seem to remember it can over-correct. We'll definitely look into this as part of the F3 development*. It may be unfixable, but we'll see.
*The F3 doesn't have TFR but we will still be under the bonnet on Tornado code in general.
-
@SteveMk1 said in Tornado GR.1:
Hi @Derek the most recent post was from a different poster, not me the OP, which is why it says different things about time scales etc.
I sadly had no joy with the simconnect fix, from what I can work out TFR seems to hold a baro altitude rather than a rad altitude, which doesn't end well when the terrain changes. When TFR is holding a fixed altitude (which appears to be in relation to baro height) there is a constant trim oscillation back and forth.
From reading through posts on the old JF forum, problems with the TFR seem to have been there for a long time (possibly since release? ) e.g. forum.justflight.com/forum_posts.asp?TID=32026&PN=1&title=a-couple-of-issues-with-v4.
I've been offered a refund when heard back from support, but will stick with the product as much of it is great. However, it would be amazing to have a working TFR as featured in the advertising. Perhaps it is just a problem with my PC (should be building a new one in the next few weeks)? It would be great to know if anyone at JF can operate TFR successfully and post a video up so I can see what should be happening.
Best wishes
Steve
Sorry for the thread necro, but I've got the exact same problem.
Fresh Tonka install, latest installer available from Just Flight downloads. Running P3Dv4.5 still.
The TFR pitches up and down while steadily diving towards the ground. I've tried different combinations of modes, but the result is always that the aircraft plunges into the ground.As a sidenote...
I'm aware of a freeware TFR gauge that can be installed on different aircraft; I haven't fiddled around with it on the Tornado, but I know that it works on many other aircraft, like the CS C-130 (now one of the default P3D aircraft), as well as on the Virtavia B-1B. And there are other aircraft that it does not play nicely with. Not a perfect implementation of a TFR, but workable, even if one needs to sit and watch like a hawk and be ready to disengage the AP to avoid terrain at times.Anyways, like many people have said in the old forum, for the Tornado GR1 the TFR is not just a nice-to-have gimmick; it really is the bread and butter for this aircraft. So would very much like to see it fixed.
-
@endl3ss I think they've never fixed it. I've owned for about 18 months and it's not worked in that time (in fsx, p3dv4 or p3dv5). It feels a bit uncomfortable that for all that time functioning terrain-functioning-radar has been listed on the product description.
-
@Voice-of-Reason any update on this one?
-
@Derek said in Tornado GR.1:
The TFR is a bit of a bodge - always was on the old RAF Tornado. I seem to remember it can over-correct. We'll definitely look into this as part of the F3 development*. It may be unfixable, but we'll see.
*The F3 doesn't have TFR but we will still be under the bonnet on Tornado code in general.
Given that the F3 now is out, has there been any work done on the TFR of GR1 as well?
