DHL Traffic at EGNX
-
@Capt-Quirk said in DHL Traffic at EGNX:
@PLavaz01
Hi Pablo,
A really quick and easy way to add UPS & FedEx traffic (or any airline) would be to use AIG's One Click Installer (if you have P3D) which allows you to choose individual airlines and will work just fine alongside TG ai to fill in some of the gapsHello,
Thank you very much for your message. I am not sure how to do that. If you could tell me how, I will appreciate it. I am running P3Dv5.1.
Regards,
Pablo Vazquez -
@Capt-Quirk said in DHL Traffic at EGNX:
@PLavaz01
Hi Pablo,
A really quick and easy way to add UPS & FedEx traffic (or any airline) would be to use AIG's One Click Installer (if you have P3D) which allows you to choose individual airlines and will work just fine alongside TG ai to fill in some of the gapsUsing another AI program to make it work is counterproductive and you should not need to do this or TG will never be what it was intended, and in the end will drive users away for some it already has, thats why my feedback may look like a dig at TG but i want TG to reach it`s full potential.
-
This post is deleted!
-
Chaps,
Would you try compiling your custom AI flights again with this revised version of the app?https://justflight.sharefile.com/d-sc44f6ff177cb4484aa482be284d91a04
I think what is happening is that the airports are full up of traffic from the normal database and are therefore getting booted out by the sim when its going through the traffic bgl and generating the flights in the sim.
I've reworked the compiler so that people's custom flights will be given priority and combined them all into a single bgl file rather than having a separate file for the normal airliner and custom traffic respectively.Please let me know if its better/worse/unchanged.
Thanks
-
Download and run no change KMEM and KSDF still dead with over a 100 Cargo gates empty.
Rich can you add a V5 Airport Scanner in the Options in the next update.
MAIT Mongolian Airlines not an aircraft just a random why to remove the missing airlines error.
EGLL half empty of parked aircraft at the start of the day.
EGLL 160 plans
EGCC 300 plans
EGKK 246 plans
EGSS 160 plans
EGBB 132 plans
EGNX 95 plans
Going by this HEATHROW is no longer the biggest airport in the UK.
EGLL default install and compile today.https://www.flickr.com/photos/154944674@N05/50724700707/in/dateposted-public/
EGLL same addon airport UK2000 in May 2019 48.000 single leg plans.
https://www.flickr.com/photos/154944674@N05/47972006111/in/dateposted-public/ -
Another problem that reduces traffic that effects most major airport flight plans and stops them working timing errors.
https://www.flickr.com/photos/154944674@N05/50723926973/in/dateposted-public/
The new added error log.
https://www.flickr.com/photos/154944674@N05/50724662736/in/dateposted-public/
This is how i get more traffic than most users custom TG Scenery BGLs.
https://www.flickr.com/photos/154944674@N05/50723943403/in/dateposted-public/
I am at the moment updating to V5 BGLs as V4 BGLs can cause the default airports to display incorrectly. -
KMEM 1.1.1.9. FedEx main hub.
https://www.flickr.com/photos/154944674@N05/50724877486/in/dateposted-public/
KSDF UPS main hub.
https://www.flickr.com/photos/154944674@N05/50724964147/in/dateposted-public/ -
Hello Rich,
I downloaded the file you have created but got the message "unable to load scenery file". So I copied and pasted it into the TG file and re-compiled my AI flights but this action may not have activated the file.
Nothing has changed at EGNX. The only DHL plane that appears is one 757 which must be part of the main traffic data base which I have spotted previously. If a flight from the main data base appears why can't a flight using the same aircraft model from "My AI flights appear? By the way I have produced about 7 flight plans for the DHL 757 in and out of EGNX. I have also created them from and to other airports like LPWA and EDDK and the flights appear. Therefore I'm not sure its a priority issue because I can see a number of other "My AI flights" at EGNX inc Loganair and Aurigney TNT (757) and UPS (A300)
I am not using the latest TG version 1.1.1.9 because it does not have the facility to compile my AI flights anymore. I submitted a ticket about this but heard nothing yet.
Cheers and thanks
Gary -
My Flights tool still in TG 1.1.1.9
https://www.flickr.com/photos/154944674@N05/50730522392/in/dateposted-public/
Just click on add new flight plan TAB. -
Hi Ray,
Are you saying that there is no need to compile a new "My AI" flight plan in version1.1.1.9?
Cheers
Gary
-
Hi,
I wanted to ask a solution to a small problem.I am using FSX Steam Edition and after uninstalling Traffic Global, every time I turn on FSX Steam Edition, I get a warning window at startup:
SCENERY.CFG file error. Local scenery directory C: Users, Documents, Traffic Global, Airport Faci in scenery Area.121not found.
Is there a solution to this problem? Sincerely,
Martin -
@Lockheed-lad said in DHL Traffic at EGNX:
Hi Ray,
Are you saying that there is no need to compile a new "My AI" flight plan in version1.1.1.9?
Cheers
Gary
No and a tip compile My AI Traffic flight plans on there own and not with the main Traffic Global Flight plans,
I found doing both at the same time only the My AI Traffic flight plans show in the error log with no errors which i know is wrong, this is because the main plans compile first then the My AI Traffic plans last, run the My AI Traffic on there own you see the errors because the they never compiled running both together, run the main TG Flight plans on there own you get get the error results for those plans,
Then when you compile My AI on there own you see the error log results for My AI plans.
TG has issues that need attention in the future updates -
@Lockheed-lad said in DHL Traffic at EGNX:
Hi Ray,
Are you saying that there is no need to compile a new "My AI" flight plan in version1.1.1.9?
Cheers
Gary
Try going to options then select Run Setup Wizard when this screen comes up.
https://www.flickr.com/photos/154944674@N05/50586064776/in/dateposted-public/
Check that the steam version box is correct and pointing to your steam FSX:SE install, if this is incorrect you can click on the folder icon and point TG to your install, Simobjects folder. -
This is what happens when you compile both TG Global fight plans and My AI plans together.
https://www.flickr.com/photos/154944674@N05/50731535441/in/dateposted-public/
No errors everything looks good but run My AI on its own and see this.
https://www.flickr.com/photos/154944674@N05/50731643152/in/dateposted-public/
Then run TG Global flight plans on its own and see this.
https://www.flickr.com/photos/154944674@N05/50730816483/in/dateposted-public/
You now see the problem. The compiler error log only shows the error log for the plans correctly when run separately on there own.
and the last compiled run by date and time.
This error log tells you what has been replaced in aircraft missing.
https://www.flickr.com/photos/154944674@N05/50724662736/in/dateposted-public/
Again a tip load the TG Flight Plans then select the departure tab this will place your airports in alphabetiSave Flightcal order ICAO code,
Scroll to your addon airport example EGCC find MIAT Mongolian Airlines, select this plan then the Edit Selected Flight Plan tab top left,
you can now edit this plan very simple select a livery of your choice then run the Test Compile Flight Plan to check for errors if OK, then run the Save Flight Plan Changes and go back to the Flight Plan screen and you will see the edited plan and not the MIAT Mongolian Airlines,
You can do this with any plan you can change the aircraft in the top box also if you want a particular type of aircraft and livery at your airport.
I have done this with some of my airports, still testing 1.1.1.9. -
Hi Ray,
Thanks for your detailed replies. Through a process of elimination I had learned to compile MY AI flights separately. I also know how to change a flight plan details in the main traffic folder.
With ref to the DHL 757 at EGNX all the plans that I have created produce the error log "no parking available at EGNX for DHL 757" However flight plans for the same aircraft and the TNT variant which come from the main TG data base work!
I am using P3Dv4 and UK scenery 2000 for EGNX.
Tonight I will reload version 1.1.1.9 and copy into it My AL Flights folder and see what happens.
All the best
Gary
-
My AI Flights i copy them before updating and re-install when updated to the next version, but in P3Dv5xx A300-6OOf FedEx do not show in the sim since 1.1.1.8 was installed, i have a load of them in My AI Flights and the strange thing is they do come up with errors in the compiler but do not show in the sim, The DHL A300-600f shows in all the time since release i get the impression the compiler has a mind of it`s own what it will compile.
If you change a flight plan in the main TG flight plans by editing and changing to type AB6 it will sometimes show odd. -
Hi,
I have no re-loaded version 1.1.1.9. and copied in My Ai flight plans. How do I compile them as there is no longer a compile function? See image.
Thanks Gary
-
Hi Jord77,
I dont understand what you mean, but I have followed your advice but it makes no difference. None of MyAI flights appear. In all previous versions of TG I have had to compile My AI flights but in the latest version there is no compile function. Therefore how can ! get My AI flights plans to work with version 1.1.1.9?
Cheers
Gary
-
@Lockheed-lad said in DHL Traffic at EGNX:
Hi Jord77,
I dont understand what you mean, but I have followed your advice but it makes no difference. None of MyAI flights appear. In all previous versions of TG I have had to compile My AI flights but in the latest version there is no compile function. Therefore how can ! get My AI flights plans to work with version 1.1.1.9?
Cheers
Gary
Right click "Minimize the ribbon" to see the compile button
