VC10 SUPER Caution Sound on throttle up
-
VC10 SUPER Caution Sound on throttle up. I've checked the flaps settings and elevator pitch trim are correct but I get the warning sound as soon as I throttle up. What am I not doing to stop it sounding?
-
Please check the following:
- The flaps are set to the T/O position
- The tail-plane (elevator) trim is set to between +2 and +7 degrees (the white band on the tail-plane trim indicator)
- The speed-brake lever is set to fully retracted
- All PFCUs are on
-
yes all those are checked and ok but I still got the sound when opening the throttles:(
-
Can you submit a support ticket? Our support team will get in touch to track down which parameter is 'out of bounds' and causing the warning horn.
-
@Martyn ticket sent
-
@Martyn said in VC10 SUPER Caution Sound on throttle up:
The tail-plane (elevator) trim is set to between +2 and +7 degrees (the white band on the tail-plane trim indicator)
Just noticed the trim is not working there are no white marks showing
-
The trim indicator is on the centre panel, below the left slat position indicator. It has a single white needle and there is a white banded area which indicates where the trim should be set for takeoff.
I've just given it a quick test here and it is working OK for me, but we'll get back to your ticket ASAP.
-
@Martyn wasn't it a requirement for one of the stall warning systems to be operative?
-
Sorted it Martyn what I didn't realise was only the keyboard command 1 or 7 will alter the trim setting. many thanks can you dump the ticket please.?
