No Traffic at Stansted airport
-
When compiling P3Dv5 flight plans the rescan airports in the option box at the bottom will scan your P3DV5 scenery data including your addon airports like this.
https://www.flickr.com/photos/154944674@N05/50497963027/in/dateposted-public/
This East Midlands addon airport v5 data which was also edited by me with ADE tool not the default TG scenery file.
Note the top P3Dv5_airport.dat)
https://www.flickr.com/photos/154944674@N05/50488920448/in/dateposted-public/
Stansted in P3Dv5.
https://www.flickr.com/photos/154944674@N05/50497999077/in/dateposted-public/
P3Dv5 airport scenery data UK2000 addon.
https://www.flickr.com/photos/154944674@N05/50498024287/in/dateposted-public/
The correct position for TG airport facilities in the P3Dv5 scenery without this you will get problems, above your base scenery and below your addons in case ORBX then the addon airports above that, also UK2000 Common Library should be with your UK2000 airports in the scenery folder. -
Ok am I missing something here it compiles ok but I don't
get no traffic at uk2000 airports. I cannot rebuild the scenery data as I get this message come up 
It is telling me that there is an empty path there is no entry for p3dv5 in the select simulator box -
Still no traffic have uninstalled and reinstalled gone to LEMD and loads of aircraft but EGSS not 1 single aircraft in sight
-
This is LEMD -
This is EGSS plus Stansted is not in the drop down menu for super traffic board when i was using v4.5 I did not have a problem -
When you install an addon airport in P3D with TG installed you will have 3 AFCAD BGL`s for that airport in the sim, and when you start the sim it will use the Scenery BGL with the highest priority so you can have.
3 UK2000 scenery bgl
2 TG scenery bgl
1 Base stock bgl
That should be in that order and will load the highest priority 3 scenery bgl UK2000 if they are in the correct order shown above,
Where is UK2000 Stansted in your scenery order above TG airport facilities i hope, in fact you can disable the EGSS bgl in the TG scenery folder to test this. -
Is this what I have to change
-
Day 6 no traffic at any uk 2000 airports now begin to think I will give this up as a bad job and wait for UT live 2 to come out
-
Yes if you read what i said Stansted needs to be above Traffic Global and all your other addon airports as you will have problems.
As you can see both Traffic Global folders are below may addons and just above the base scenery folders.
https://www.flickr.com/photos/154944674@N05/50403882793/in/dateposted-public/
I have been using TG since release and soon found out placing TG i the correct order is most important for it to work correctly.
In fact both your screenshots show TG in the wrong scenery order. -
@dennison51 said in No Traffic at Stansted airport:
Is this what I have to change
Hi, Dennison
You can use the Scenery Library to make the adjustment to the scenery order.
-
As you can see I have done what you said and still no traffic at Stansted the sim has been running all day with no AI traffic
-
And still Stansted is not showing in the drop down menu of super traffic board
-
I don't know why there is two folders I have deleted one of them. The main traffic program is installed in drive D Program files(x86) and there is another folder in C drive users/name/Documents/Prepar3Dv5 Addons I suppose that C drive is the traffic Global airport Facilities folder.
I have done a search for the Traffic Global Airport Facilities folder but it is saying no items match your search could this be the problem. -
The C drive is the TG default install location but when you install it will place two folders in the P3Dv5 Scenery if installed correctly, The TrafficGlobal folder is what TG uses to link with the sim the Traffic global Airport Facilities is copy of TG Scenery folder where the AFCAD bgl`s are for the airport, this must be moved below your addons if it is above your addons then the sim will ignore your addon AFCAD file and use the TG AFCAD file, this will result in the airport not working correctly and aircraft in the wrong location not matching your addon airport.
However i think your EGSS UK2000 airport may have a problem you should ask on the UK2000 forum as someone my have had the same problem and found the fix, as i think this an airport problem and not a TG problem.https://www.flickr.com/photos/154944674@N05/50512391118/in/dateposted-public/
Shown are the two TG folders in the correct location for P3Dv5.
PS have you run makerunways in Super Traffic Board and Scan airports this should always be done after adding an airport to update the sim.
This can be done through the Configuration TAB. -
@Ray-Fry Yes I have run make runways in super traffic board I have now moved TG under the airport facilities. I did put a post on the uk2000 forum but they don't seem to be getting back to me, I will look on the forum to see if there is any problems.
-
just been on uk2000 forum and looks like they are blaming TG
-
Begs the question why are others not having this problem in V5.
If you go to Documents\Traffic Global then open the Airport Facilities folder scroll down to AFX_EGSS.bgl , then left click a box will appear around the entry then left click behind the bgl then edit the entry to this, AFX_EGSS.bgl.OFF this will now turn off the bgl, then recompile TG it will no longer use the TG scenery BGL only the addon bgl for UK2000 if that does not correct the problem then you have some other problem, As TG no longer compiles using the TG bgl.
If this looks to much then just delete the EGSS bgl in traffic global scenery folder it will remove TG from having any affect on UK2OOO.
Why did you post in the V4 UK2000 forum and not the V5 you are using V5 i take you did download the V5 updated EGSS in your account. -
I had not realised that I had posted it v4 on uk2000 any I have done what you said but no change I will be away for just over a week as from tomorrow.
