stuck on creating cargo flight plans P3D v5 HF2



  • It seems the problem where nothing happens during compiling of flight plans for cargo traffic is back, at least for me it is. When switching off regenerate schedules for cargo traffic everything works again. GA traffic does compile. I use p3d v5 with hotfix 2. I downloaded the latest version 1.1.1.5 again to be certain I had the latest version, but still not working.
    It was working before, but I think this was on hotfix 1 I'm not sure anymore, since then I have also installed some extra airports, so it is quite difficult to say why it is no longer working anymore.
    It seems the countermeasure to prevent this from happening is not working in all situations.

    Any suggestions ?

    Thanks !



  • Hello ,

    I have just Installed Version 1.1.1.6 into my P3DV5.2 and i am stucked on Creating Cargo flight
    plans !!
    Any help from the developers will be appreciated !

    Mike


  • JF Staff

    Hi Mike,
    Does it just hang or are you getting any errors?
    Does it complete if you untick the option for including cargo flights in the compile?



  • Hi Rich ,
    No errors ! It just hang on .
    Yes it does !!



  • It`s not hanging for me just not showing in P3Dv5.
    Just re-compiled but still not showing in sim.
    https://www.flickr.com/photos/154944674@N05/50298485091/in/dateposted-public/



  • Mine just hangs on cargo and I left it on last night and it was still hung this morning. I looked at the Task Manager and it said the app was not responding.



  • Same here.

    Application stucks compiling cargo flights



  • Hi Rich,
    Can you give some incite to what the numbers mean.
    https://www.flickr.com/photos/154944674@N05/50304290023/in/dateposted-public/
    I understand the gate size HARD 33
    But RAMP GATE, 100. no, no , can they park at both RAMP or GATE.
    I am still trying to workout why i get a parking error when i know ramps are available.


  • JF Staff

    Thanks chaps. I'll be looking into why the cargo compiling is stalling for some people. I'm fairly sure I know what is causing it and will get it fixed.

    @Ray-Fry said in stuck on creating cargo flight plans P3D v5 HF2:

    Hi Rich,
    Can you give some incite to what the numbers mean.
    https://www.flickr.com/photos/154944674@N05/50304290023/in/dateposted-public/
    I understand the gate size HARD 33
    But RAMP GATE, 100. no, no , can they park at both RAMP or GATE.
    I am still trying to workout why i get a parking error when i know ramps are available.

    Hi Ray,
    Those numbers are as follows...

    parkingTypes = RAMP|CARGO|GATE|DOCK|MIL_CARGO|MIL_COMBAT (one or more)
    IFR% = probability of this aircraft flying IFR (0 - 100)
    AutoRoute? = automatically generate route for this aircraft (yes/no)
    TouchAndGo? = allow touch and goes when automatically generating routes (yes/no)

    RAMP | GATE means that the aircraft can be allocated to either ramp or gate parking.

    Once I've got some of the top items from my to-do list sorted, I can work with you directly to work out what is going on, Ray



  • Thanks for that rich.
    When you do have more time i can go into more detail and show you what the end user finds after compiling.
    But for now i will carry on and see what i can find i have edited some of my flights, example the A300_600f is now AB6 and not ABY or ABF as before this caused a error in my plans unknown aircraft type.
    Also the A300st BELUGA will not show i used this for LFBO flights.



  • Hello ,

    I have just Installed the New Version of TrafficGlobal_EarlyAccess_1.1.1.7
    I get exactly the same error !!
    It stucked on Creating Cargo flight plans !!
    I thought that with this version you would have fixed the issue , but unfortunately Not !

    Mike


  • JF Staff

    @mikee said in stuck on creating cargo flight plans P3D v5 HF2:

    I get exactly the same error !!
    It stucked on Creating Cargo flight plans !!
    I thought that with this version you would have fixed the issue , but unfortunately Not !

    In my defence I never stated in the change log that this update was going to fix this. Unfortunately I haven't been able to replicate this issue, and nor has any of my colleagues here. That leaves me a little stuck as its very hard to track down the cause. I included some best-guess changes in this latest version, but it was very much a shot in the dark.
    What I need are some volunteers to run a test version for me that will spit out a log which will hopefully allow me to identify the point at which this is happening.
    If anyone reading this is happy to help me with this, please let me know!



  • Rich,
    thanks for adding selected airlines to the flight database, but I noticed that the flight database is not identical to the traffic in the flight simulator. Will it be fixed by the following updates? Thanks,
    Martin



  • @Rich said in stuck on creating cargo flight plans P3D v5 HF2:

    @mikee said in stuck on creating cargo flight plans P3D v5 HF2:

    I get exactly the same error !!
    It stucked on Creating Cargo flight plans !!
    I thought that with this version you would have fixed the issue , but unfortunately Not !

    In my defence I never stated in the change log that this update was going to fix this. Unfortunately I haven't been able to replicate this issue, and nor has any of my colleagues here. That leaves me a little stuck as its very hard to track down the cause. I included some best-guess changes in this latest version, but it was very much a shot in the dark.
    What I need are some volunteers to run a test version for me that will spit out a log which will hopefully allow me to identify the point at which this is happening.
    If anyone reading this is happy to help me with this, please let me know!

    Thank you Rich !
    No worries take your time !
    Most probably i misunderstood your previous reply .
    ( I'm fairly sure I know what is causing it and will get it fixed )

    Cheers
    Mike



  • I'll volunteer to run a test version Rich, I'd love to get this fixed asap.

    Regards.

    Simon B.


  • JF Staff

    @Simon-B said in stuck on creating cargo flight plans P3D v5 HF2:

    I'll volunteer to run a test version Rich, I'd love to get this fixed asap.

    Regards.

    Simon B.

    Thanks Simon! I'll get in touch early next week with a test version for you.



  • Great, thanks Rich. I'll wait to hear from you.

    Regards.

    Simon B.



  • Hi Rich,

    I installed the recent version of Traffic Global this morning (1.1.1.7).
    Me too, I have the same problem, but if it can help you to investigate the source the problem, an error message appear just before the popup "Cargo Traffic... Crerating Crago Flight Plans..."
    I thing this message is generated by Visual Studio.
    The details of the message is in french beacause my IO is a french version (Win 10).

    I don't know why but I am unable to copy this message in the clipboard. I am unable to select the text.
    So, there is 3 print screen in wich you can see what line number of your code will be the source of the problem
    I hope, that will help you:
    error01.jpg

    error02.jpg

    error03.jpg
    If I click Continue, this message dissappear and the popup "Cargo Traffic... Crerating Crago Flight Plans..." stay on the top of the screen indefinitely.

    For your information, I run the application as an admnistrator.

    Best regards.

    Claude.



  • Hi,
    I use FSX SE and I have the same problem when creating cargo flight plans. However, at airports, cargo planes are visible and normally operate smoothly.
    Martin



  • I'm also running FSX-SE and TG compiler is currently hanging on creating cargo flights.
    For me, at least, the program hung in v1.1.1.6 too if I tried to compile airlines+cargo+ga all at once, but compiling each individually worked ok.
    Some cargo ai is there because, when TG installs, it's copying a default set of flightplans into your scenery/world/scenery folder (this includes one traffic.bgl each for airlines, cargo & ga). Obviously, these'll be overwritten with flightplans compiled by the program taking into account whatever addon scenery you have in your scenery.cfg.