PA28R Arrow Audio Panel
-
After update 3.0 the audio panel is still not functioning correctly...
- COM 1 audio can be heard any time the Mic switch is set to COM 1, regardless of the Speaker/Phone switch position.
- COM 2 audio can only be heard when the Mic switch is set to COM 2, and the Speaker/Phone switch is up or down.
- Because the Mic switch is controlling the COM 1 & 2 audio, they cannot both be heard at the same time.
- NAV 1 identifier code audio can only be heard when the GNS 530 Ident button is held down (it should toggle instead), and is heard regardless of the position of the Speaker/Phone switch position.
- NAV 2 identifier code audio is working correctly. It is only heard when the NAV 2 power switch is set to IDENT, and the Speaker/Phone switch is up or down.
- The DME Speaker/Phone switch is working correctly. Identifier code audio is only heard when it is up or down.
I did not test the ADF or MKR audio because I was still on the ground and out of ADF range.
-
@Martyn said in PA28R Arrow Audio Panel:
What position was the KMA 20 AUTO switch in when this test was carried out?
The AUTO switch was in the default center position... Also, I have now tested the ADF audio and it is working correctly.
-
I have also now tested the MKR audio and it is working correctly..
-
I have also now tested the MKR audio and it is working correctly..
-
@RetiredMan93231 I am still having all of those issues you mentioned in v3, is it fixed for you?
@vcapra1 said in PA28R Arrow Audio Panel:
@RetiredMan93231 I am still having all of those issues you mentioned in v3, is it fixed for you?
I don't have a fix for these issues... hopefully, they will be fixed in the next release, as stated above by @Martyn.
-
I can confirm this. I'm having the same issue.
-
@vcapra1 said in PA28R Arrow Audio Panel:
@RetiredMan93231 I am still having all of those issues you mentioned in v3, is it fixed for you?
I don't have a fix for these issues... hopefully, they will be fixed in the next release, as stated above by @Martyn.
@RetiredMan93231 Gotcha, I misread your message as it all being fixed, but I see now you just meant the MKR audio works. Though for me, I can hear the MKR audio even if the switch is in the middle, which doesn't seem right.
-
We've made various changes to the KMA 20 logic which should address these issues in the next update.
@Martyn in FS2020 you can assign two different audio channels, for instance, one for aircraft and game overall sounds and a specific one for ATC communication only. In this scenario having the ATC communications audio channel set to headphone and overall game sound to speaker I thought it would be possible to switch that the same way using the Arrow III Speaker/Headphone switches but it's not working as expected, all communication goes to the speaker instead (overall sound).
Can you verify that? -
@Martyn in FS2020 you can assign two different audio channels, for instance, one for aircraft and game overall sounds and a specific one for ATC communication only. In this scenario having the ATC communications audio channel set to headphone and overall game sound to speaker I thought it would be possible to switch that the same way using the Arrow III Speaker/Headphone switches but it's not working as expected, all communication goes to the speaker instead (overall sound).
Can you verify that?@anderson I have everything going to my headphones, but that would be a really, really cool feature.
-
Where is The audio panel when using the GTN750? The audio panel touch button on the GNS750 does nothing.
