Protection failure. Please reinstall product or contact support.

Daytona125

@Con7inuum
Are you still having the random alarm sounds? I am and they are driving me crazy. I wonder if it has something to do with our download, install? Tried reinstalling, tried everything.

fcooper94

@Con7inuum I have it working using your method, but no sounds in-sim it seems.

Con7inuum

I have fixed my issues. I had been installing my 146 into my Documents/P3Dv5 Addons, which even after the 1.1 update was giving me issues.

I installed the 1.1 update directly into the sim directory, running the installer as admin and my issues disappeared, surprisingly.

I had success only this way. Every other method was broken for me and I was faced with the inability to load, the constant alarms etc.

Download and run as admin
installl to sim directory not addon folder (my documents/p3dv5 addons)
install 1.1 patch. http://tiny.cc/ajn5tz

Hopefully enjoy after....

Maushaus

@Con7inuum said in Protection failure. Please reinstall product or contact support.:

I have fixed my issues. I had been installing my 146 into my Documents/P3Dv5 Addons, which even after the 1.1 update was giving me issues.

I installed the 1.1 update directly into the sim directory, running the installer as admin and my issues disappeared, surprisingly.

I had success only this way. Every other method was broken for me and I was faced with the inability to load, the constant alarms etc.

Download and run as admin

installl to sim directory not addon folder (my documents/p3dv5 addons)

install 1.1 patch. http://tiny.cc/ajn5tz

Hopefully enjoy after....

I did that all along (before and after the update) and the issues still persist.

Mikealpha

@Maushaus said in Protection failure. Please reinstall product or contact support.:

I did that all along (before and after the update) and the issues still persist.

Same here, issues still persist.

Mike

PilotGW

I'm having the same issue even after the patch and it doesn't matter where I install it.

I've reinstalled it about 10 times now. I even went to the extreme of deleting all traces of it in the registry so I could try entering my account credentials on install again.

Mine is seemingly random. Sometimes it will load just fine, however most of the time it won't. If I load the aircraft and then load a different livery it seems to work, but I don't know if doing that will invite further issues.

Martyn

Thanks for all the information on this. The more information we have, the better chance we have of tracking down the cause(s). Always a challenge when it's working fine for us!

Can anyone encountering the issue please confirm exactly which version of P3D v4 or v5 is being used, which OS and which install location (Add-ons or P3D directory), and whether P3D is being run in admin mode.

PilotGW

@Martyn said in Protection failure. Please reinstall product or contact support.:

Thanks for all the information on this. The more information we have, the better chance we have of tracking down the cause(s). Always a challenge when it's working fine for us!

Can anyone encountering the issue please confirm exactly which version of P3D v4 or v5 is being used, which OS and which install location (Add-ons or P3D directory), and whether P3D is being run in admin mode.

I'm using:

P3D v5.1 HF1 (5.1.12.26829)
Windows 10 Pro Version 20H2 (Build 19042.630)
Both install locations tried
Sim is set to run as administrator through compatibility settings (FSLabs Configurator overrides any setting for this)

Mikealpha

@Martyn

I'm using:

P3D v4.5 (4.5.14.34698)

Windows 10 Home 64 Bit 

Both install locations tried

Sim is set to run as administrator. BAe146 Installer has been executed with "run as administrator"

Con7inuum

Mine is suddenly not working again. I give up.

Freshly installed P3DV5 HF1.
Windows 10 Pro Build 19041
Both install locations tried
146 Installed as Admin and Sim running as admin.

thorsten42

Seeing the error from time to time but switching even between liveries working fine to get it going:

P3D v5.1 HF1

Windows 10 Pro Version 2002

Addon Folder

Sim is set to run as administrator

Cheer
Thorsten

Martyn

Thanks all. This remains our top priority and was a bit of a mystery given that this product uses exactly the same systems as all our products for many years.

It'd be great if you could try a few tests for me - http://tiny.cc/spr5tz

In turn, move each of those test gauges into \SimObjects\Airplanes\JF_146-100\panel, overwriting the existing file, and then load P3D to see if there is any change to the issue.

Also, if you don't already do so, please try right clicking and running P3D in admin mode even if the properties are set to run in admin mode.

Ither

P3D V5.1 HF1
Win 2004
Sim is set to run as Adminstrator

Installed to Addon folder

1.1 update - protection failure
Test A - protection failure
Test B - protection failure
Test C - protection failure

Even tried it by right clicking -> run as admin which doesn't matter but for sake of request I did it anyways.

Reinstalled to Sim folder

1.1 update - protection failure
Test A - protection failure
Test B - protection failure
Test C - protection failure

Even tried it by right clicking -> run as admin which doesn't matter but for sake of request I did it anyways.

Loading default plane then the 146 results in alarms that won't shut up.

Kind of bums me out since I got it for my Birthday.

Martyn

Are you able to provide me with a recording of the alarms that can be heard?

fcooper94

I have tried the fixes above also.

I can get the sim to work if I load a default a/c first then load the 146. All works, apart from the issues I have put in the other forum post (Audio Control Panel issues with VATSIM).

Ither

@Martyn said in Protection failure. Please reinstall product or contact support.:

Are you able to provide me with a recording of the alarms that can be heard?

I'm seeing two things.

If I load BAe first, then load Raptor, then load back to BAe I get this weird alarm.

Video URL: https://imgur.com/a/5Y9FkWf

If I load Raptor first, then BAe, I get no alarm but I am getting what I think is the engine starting sound constantly repeating. It's happening even in cold/dark.

Video URL: https://imgur.com/a/Fkm4L2o

Martyn

Thanks for the videos!

Please move this version of the gauge into \SimObjects\Airplanes\JF_146-100\panel, overwriting the existing file, load P3D to see if there is any change to the issue and then send me the JF_146.cfg file from within the %AppData%\JustFlight\JF_146\P3D\ folder (either PM me the results or send to martyn@justflight.com).

http://tiny.cc/vzr5tz

Daytona125

@Martyn It seems to be many different alarm sounds depending on which plane you try. Different sound for 146-100 and different sound for the 146-200, often even different alarm, crashing sounds for different liveries. And when I try to reload the sounds from your drop down menu the alarm sounds double. The only way to stop it is when I disable the sounds from your dropdown menu but I then lose all the custom sounds ie: switch click sounds. Hope this helps.

Ither

@Martyn said in Protection failure. Please reinstall product or contact support.:

Thanks for the videos!

Please move this version of the gauge into \SimObjects\Airplanes\JF_146-100\panel, overwriting the existing file, load P3D to see if there is any change to the issue and then send me the JF_146.cfg file from within the %AppData%\JustFlight\JF_146\P3D\ folder (either PM me the results or send to martyn@justflight.com).

http://tiny.cc/vzr5tz

Sending you the CFG via email -- same issue; getting protection error.

I did this with the 1.1 update file above but not any of the test gauge files.

However, loading Raptor then into BAe seems to fix the weird sound with constant engine startup.