BAe 146 Professional P3D v5 FMS/AP Issues
-
@Martyn said in BAe 146 Professional P3D v5 FMS/AP Issues:
Hi all,
Thanks so much for all the feedback and clear/concise bug reporting. This is our most complex aircraft by a long way and we're eager to continue to improve it with not just bug fixes but additional features.
We are working through all the feedback and the first update will be available shortly.
Thanks
MartynHi Martyn, that's fantastic news I look forward to the update! & thank you for all your hard work. Kind Regards Harry
-
And here's a change log for the first update:
- MWS cautions triggered with electrical power off - fixed
- 300QT ASL airlines livery - fixed
- Improvements to spray effect
- Autopilot not following FMC route with LNAV engaged - fixed
- Heading bug not settable with LNAV engaged - fixed
- Minor changes to FDE
- Improvements to exterior glass reflectivity
- Changes to security validation to reduce risk of failure
Thanks
Martyn -
I agree with all the issues above. Thanks for the quick update, I will try it out.
In addition to what was mentioned, I have the following issues:
- In the VNAV page of the FMC I was unable to go to page 2 (FMC indicated there were 2 pages, but unable to go there).
- It's not possible to set the altitude/FL for any waypoint in the FPL page.
Besides these issues (that make the plane nearly impossible to fly properly), I really like the simulation of the BAE 146 and am confident these issues will be solved.
I fly the P3D 4.5 version.
-
Cannot believe I have just spent £60 on something that clearly has not been tested correctly and is unflyable in my eyes. The FMC has no click spots and is INOP. I can see people having issues are mainly using p3dv5 maybe that is somewhere to start?
-
The FMC is by no means essential for flying the 146 and wasn't original navigation equipment, although we appreciate that it's many simmers navigation method of choice, and we will of course address any issues.
We've had no issues with the FMC controls during extensive testing and that's not a known issue so please submit a support ticket so we can investigate further. The FMC should certainly be operable and has been used to fly many test flights in both v4 and v5 so something is wrong beyond anything more specific issues mentioned above.
Thanks
Martyn -
Firstly, well done on this brilliant plane. Great all round and I am confident it will get better.
A few things that I have had trouble with on the tutorial flight:
- Config test never passes, after going through everything in the tutorial I am not sure what is not configured. But I went through it several times already now. and did the flows from scratch but none the less the alarm still sounds on the config test.
- Return flight, aircraft did not allow any yoke inputs mainly pitch and roll, AP was off. Rudders worked fine, both are set to the joystick for control. Would be great to know what the config test looks for so we can check those items.
- Using active sky weather, the aircraft had difficulty staying on course while following a direct to VOR, constantly adjusting left and right even when far out.
- I believe there is a "flash light" feature from your preview videos, unsure how to turn that on.
- Flight dynamics: aircraft seems fairly sensitive to inputs when hand flying, sudden fast jerk up or down pitches.
- APU exterior sound is fairly quiet.
- Suggestion: A tutorial video, so that newcomers can get a better visual of flows and where things are located.
I have only done a couple flights without the FMS but will give that a go next week.
best,
Philip -
Hello
after flights with V1 and V1.1 I have the following feedback/problems (P3D5.1hf1):
- I like the plane in general, nice exterior and cockpit (but why worn off switchbutton on NAV1?), very nice cockpit lighting, realistic sound.
- FMC: select SID - I can only choose 1 to 4, if more SID are available, I can not enter or choose 5 6 7 8...
- LNAV in 1.1 usable, but for my taste overshoots waypoints too much, struggles to come back on track.
- same or similar with the ILS interception... LOC and GS... don't know why it strggles or turns the wrong way - will try again
- Trim: very sensitive, I have a joystick button assigned, wish there was half the rate for changings.
- Mouse scroll wheel - for my taste it should behave the opposite way (as used from other planes). Or can it be changed somewhere?
- Turning knobs: is there a key for turning faster? normal 1 click 1 step / accellerated 1 click 10 steps
- AP/ALT: leveloff 100ft below selected ALT
- would be nice to have [shift+8] for a pop up window of center console (AP/XPDR/Brake)
greetings
msair -
I used the first update for my second flight. The issue of AP not following the FMC or VOR inputs is solved :) . So I was able to fly the flight and do an ILS approach into LMML.
The issues with the FMC are still there (as expected, can imagine it takes longer to fix). At least I am able to turn on the FMC and use it is some way. But personally, when paying € 75 euro's for this package, I don't expect these issues. And yes, you can fly the plane without using the FMC, however i bought a product Including an FMC. Sure for this money. So I am not entirely satisfied.
And as I only fly on Vatsim and the Com radio's don't come active in Vatsim (see my other topic), it is pretty much a useless product for me at the moment.
-
@Martyn said in BAe 146 Professional P3D v5 FMS/AP Issues:
And here's a change log for the first update:
- MWS cautions triggered with electrical power off - fixed
- 300QT ASL airlines livery - fixed
- Improvements to spray effect
- Autopilot not following FMC route with LNAV engaged - fixed
- Heading bug not settable with LNAV engaged - fixed
- Minor changes to FDE
- Improvements to exterior glass reflectivity
- Changes to security validation to reduce risk of failure
Thanks
MartynI downloaded the patch made available above, and have similar issues as the others.. Additionally, with regards to the "Improvements to exterior glass reflectivity" line item, tbh, doesn't look really different to the release version. It's pretty much the exact same. There's no depth and color tot he surface. There are a TON of pictures on the internet showing this, but I'd be happy to find a few if it helps correct this. It really looks strange without it.
Thanks!
-
I also have downloaded the patch to date V1.1 and am still having issues.
-IAS Flight Directors and Autopilot hold not pitching or even 'chasing' for bugged speed.
-AP button engage not clickable from the cockpit.
-HDG bug still tied to CRS in RNAV HSI mode
-F/S (Fast Slow indicator flickering and not correctly showing fast/slow relative to bugged speed)
-Posted in other thread as well, still having "Protection failure. Please reinstall product or contact support". -
@Con7inuum I might be wrong, but AP I think is only activated from the center console, next to YD korry switch.
-
'A' stood for altimeter. It told how high a man flew. 'B' stood for boost. It told the power in the engines. 'C' stood for compass. It told which direction a man was proceeding. It was delightfully simple.
-
Same issue on my end - The only workaround is to start vpilot in standalone mode and use audioforvatsim (standalone client) - Would be nice to get that fixed asap :)
Steve
