Trouble Taking Off [FS24]
F28 Professional
3
Posts
2
Posters
54
Views
1
Watching
-
I am skittering all over the runway while taking off. I can't seem to keep it on the center line. Is there some kind of trick I'm missing or is this normal behavior for this aircraft? FS24 latest version.
-
Tricky one to provide a definitive answer for without further information, but we'll list a few recommendations below:
- Ensure the aircraft is operating within its published crosswind limits (30 knots for the F28)
- Ensure that your pitch, roll and yaw axis all have linear sensitivities (accessible in MSFS 2024 Settings > Controls > Hardware Settings)
- If you have suitable external hardware that allows you to control the rudder axis and Nose Wheel Steering Axis independently, you may wish to try disabling the "Rudder Steering Axis" option on the EFB Configuration Menu.
Hope that helps.
Mark - Just Flight
-
Tricky one to provide a definitive answer for without further information, but we'll list a few recommendations below:
- Ensure the aircraft is operating within its published crosswind limits (30 knots for the F28)
- Ensure that your pitch, roll and yaw axis all have linear sensitivities (accessible in MSFS 2024 Settings > Controls > Hardware Settings)
- If you have suitable external hardware that allows you to control the rudder axis and Nose Wheel Steering Axis independently, you may wish to try disabling the "Rudder Steering Axis" option on the EFB Configuration Menu.
Hope that helps.
Mark - Just Flight
@Mark It was well within crosswind limits. I don't have tiller hardware. But there was no dead zone, so I'll try adding that to see it it helps.
