Traffic Global Aircraft Fleet Update
-
@Capt-Quirk
I'll have to track down the AN225 to take a look at it....pretty sure it's not going to be seen flying around on any kind of regular sched.
15GB of TG testing....that's a lot. I have to give you credit, I normally just look in now and then to see where it's at. -
74F Still a problem.
https://www.flickr.com/photos/154944674@N05/49678983276/in/dateposted-public/
https://www.flickr.com/photos/154944674@N05/49678983616/in/dateposted-public/
https://www.flickr.com/photos/154944674@N05/49679273207/in/dateposted-public/
https://www.flickr.com/photos/154944674@N05/49678984321/in/dateposted-public/
Atlas Air the only one that works in P3Dv4.5, I have tons of Cargo parking at LTFM and use it for testing, some wing spans are still not correct and have edited them.
Regards Ray Fry. -
-
C152 GAA-5 black windows and prop discs
-
Default Beaver floatplane in TG_GA
-
B733 model invisible in FSX [B733w sole repaint Boliviana: model visible but texture black]
-
B747 centre gear in landing config when on ground [B748i centre gear completely stowed with upper leg protruding through wing]
-
An225 model incomplete
-
Dash8-400 prop textures visible at idle within disc when at full throttle
-
ATR42 nosewheel contact point
-
No nosewheel steering
[Default FSX : TG v1.1.1.2 reinstalled from scratch and model update applied]
-
-
@vortexwake
I'm afraid the vast majority of folk are unlikely to actually see the An-225 at all as both flightplans are chucked out during the compilation of TrafficGlobal_myFlights.bgl, even with the modified AFCADs provided with the installation of TG.
[Default FSX : TG v1.1.1.2 with model update]
During the past months, I've created a mass of flightplans for testing purposes and that's what I'm using (obviously) in order to see it in sim.
Since there is only one flying example in real life and the TG model is untextured, I can't quite figure out why it was included in the first place, though it is (or at least, was before this update), a very nice model to use in your own flightplans. As is the sole Airbus Beluga livery which, since no flightplans are provided for that either, I would imagine most users don't even realise is in there. Nor would they catch sight of the A306 BA livery (whose reg G-EUPX in real life belongs to an A319) which is included for some bizzare reason.:thinking_face: -
@Capt-Quirk
Not being able to see the AN225 because it gets booted out of the regular compiler process even after modified AFCADS being added to TG makes sense. Have to assume that it would be the same situation for the Beluga.
The building that the AN225 seemed to be embedded into in the screen shot that you posted would probably make flying somewhat problematic anyways. -
@vortexwake
Yeah, it is rather :beaming_face_with_smiling_eyes: unusual to attempt formation flying with your garden shed... -
Hi all,
We've addressed the model issues listed in this thread. Please install this hotfix and let me know if any other problems remain.
One exception - the nosewheel for the ATR 42 looked fine for me. Are others also noticing this one?Thanks all
-
@Rich
Hi Rich,
Thanks for the update.
I have had a quick peek at the relevant models and most issues seem to be fixed, aside from the following:-
The B748F now appears to have the inner bogies in landing configuration.
The ATR 42 nosewheel is still half buried (I tried this at several default airports with the same result, but maybe it's just me...)
The B733s are now visible in FSX! (although JFAI_737_300_w_Boliviana still appears black)
[default FSX dx9] -
Thanks Capt,
I hadn't done anything with the 748F, so I'll sort that now. Apologies for missing that one.
I'd tested the ATR in P3D only, so I'll give it a go in FSX in case anything is showing up there.
I'll take a look at the Boliviana livery as well. -
@Rich
Hi Rich
Downloaded and ran the hotfix posted, went to run TG and recompile and received the:
"This version has expired. Please download the latest version from your account"
Currently running TG v1.1.1.2
Don't know if this is in any way related to the hotfix. -
@vortexwake
Hi,
today, when I started Traffic Global, I got the same information: Please download the latest version from your account.
After reinstalling Global Traffic this information appears again. I don't think this is related to the hotfix. -
Hi,
Unfortunately in the chaos of the last couple of weeks, it slipped my mind that the hardcoded expiry date I added at the start of the project was approaching. We are uploading a new version at the moment, but in the meantime I've PM'd you a link to some updated files.
The full download should be updated in a couple of hours. -
@Rich
No problem Rich, and thanks, just received the PM'd link.
Just so I'm clear, an updated version of TG is currently being being uploaded, and will be available to download from our JF account a few hours from now?
I can just wait until the upload is complete if that's the case, not sure that I want to start overwriting files and possibly creating any problems. But thanks again for PM'ing the link to the files. -
@vortexwake You can go ahead and download now.
Thanks a lot.
