V1. 9_ILS still malfunctioning when setting GPS wpt

Philvb

I posted the same issue 1 week ago, but in the meantime I have pinpointed the problem, and I have checked in the new ver1. 9 of the Hawk, and the problem is still there.
ILS works fine, both glideslope and lateral indikator - that is until you happen to set a direct-to way point in the garmin gps. From that point on the following malfunctions occure:

lateral indicator (HIS) on both the garmin and the analog gauge is indicating the GPS course to the set way point, the same as if you select GPS-nav with the switch on the right consol.
The glideslope indikator on the analog gauge goes "idle" showing "the flag", the gøideslope on the Garmin however still works.
I have not found any other way of restoring ILS function after selecting a way point, than to restart flight.

Screenshots where provider in the previous post, but shouldnt be necesssry as this is a universal bug on every Airport I have tested. One example just to give one, is ICAO enzv, rwy 36 with ILS frq 111.35.

GrahamNZ

Hi Phil.

I can confirm this, I’m having exactly the same issue. I’ve found if you turn off the gps on the tablet it comes right. Should be done with the gps/nav select switch. Hope they fix it soon.

GrahamNZ

Scrub that. Just had a flight with a flight plan in and it just dominated all VOR ILS and TACAN navigation. No matter what switch selections I made I could couldn’t get out of gps nav.