No Callouts
-
Hi @martyn
Does the GPWS call outs follow the same set of triggers? Sometimes I get the co-pilot call outs but when I approach the ground I don't get the radio altimeter callouts like "50 40 30 20 10"
Do I need to flip some additional switches for the radio alt call outs to reset?
Thanks!
-
@jmarkows said in No Callouts:
Does using the EFB to trigger announcements move the flight to the correct phase, allowing you to potentially "resync" it?
Not currently, it just 'registers' that callout as having been triggered to prevent it being triggered again, so for example you'll only get one, "Seats for take-off", callout per flight. Those get reset once the logic detects the end of the flight based on the above triggers.
-
@js146_ca said in No Callouts:
Does the GPWS call outs follow the same set of triggers?
The GPWS 'phase of flight' triggers are simpler and just related to height AGL and vertical speed as most of the trigger logic is instead contained within the specific GPWS modes (e.g. GPWS mode 5 - glideslope deviation).
The altitude callout logic is relatively simple though and the callouts should be heard as long as you're not in the take-off or climb phases of flight.
Is that issue happening on your first flight (i.e. your first approach)?
-
@martyn Usually on the first flight it seems to work okay as long as I trigger the FO callout with all my lights on.
But If I do get FO but no ground height callouts then it's usually after a touch and go. When I'm doing circuit practices. First landing would be okay and I'd get everything. But after that first touch and go if I were to do the approach the second time flying the pattern, I would get just the FO callouts but no ground height.
-
-
@martyn said in No Callouts:
We expect to release v1.3 this week. The current change log can be found here: https://community.justflight.com/topic/3387/update-change-logs-v0-1-2-released-edited-14-5-22
Omg.., That's an update!
Thanks guys!
