noob questions
-
Hello, as I read the tutorial given by JF, 2 questions comes to me :
-
page 20 : what the Friction control lever is for ?
-
page 69 : it is written : "Bring the throttle lever back to IDLE and then bring the mixture lever back to IDLE CUT-OFF to shut down the engine (remember to disengage the mixture lock!)."
--> what is the mixture lock ?
Thanks for your lights
-
-
@Biokerozen The answers to these can be found in the manual included with the aircraft
-
@Biokerozen the friction control lever makes the TPM levers easier/harder to actuate. This doesn't do anything in the sim obviously.
The mixture lock is a little clip on the left side of the mixture lever. It prevents the mixture lever from being brought below 40%. if you move your mouse around the base of the mixture lever you'll see the normal cursor change to a slightly different cursor indicating something can be clicked. That will set/release the mixture lock
-
@biokerozen said in noob questions:
page 20 : what the Friction control lever is for ?
It keeps the throttle lever from inadvertently moving. Sometimes, when there is a lot of vibration in the airplane the throttle lever can slowly and subtly move from the intended position.
