The new UFMC and GTN 750 in the BAE 146
-
As of Sept. 16, 2021 I have the upgraded FMC's installed for the X-plane 11 BAE 146 including the UFMC and the reality GTN 750. I know how to use the GTN 750 but will there be a tutorial on how to use the UFMC? Thanks, Lewis
-
As of Sept. 16, 2021 I have the upgraded FMC's installed for the X-plane 11 BAE 146 including the UFMC and the reality GTN 750. I know how to use the GTN 750 but will there be a tutorial on how to use the UFMC? Thanks, Lewis
@lewisananda For starters, there is a manual in the documentation folder.
-
@lewisananda could you please tell me where to download the upgraded FMC?
many thanks
marco -
@lewisananda could you please tell me where to download the upgraded FMC?
many thanks
marco@marco1212 Update it via skunkcrafts.
Is there a changelog around?
-
@marco1212 Update it via skunkcrafts.
Is there a changelog around?
@dipperdolphin From the included changelog.rtf:
v1.2
-Included UFMC (Custom FMC) support
-Included support for 3rd party RealityXP GTN750 in 3D cockpit
-Fixed windshield reflections (no more "ghosting" of taxi lines or exterior reflections)
-Improved ASI bug manipulator logic
-Reconfigured positions of instrument displays for better use of panel texture space
-Created click spot on weather radar screen for 2D pop-up window.
-Improvements to TMS: Pressing an active mode or TOGA button will return TMS to standby and freeze actuators in place
-Improved TMS actuator simulation: blue up-arrows and white down-arrows will correctly show whether the pilot needs to increase or decrease throttles
-TMS actuators will now remain centered when the thrust levers are at idle
-TMS actuators movement rate is no longer dependent on frame rate
-Fixed engines #3 and #4 low oil temperature in flight after a cold-and-dark start
-Added custom commands for the throttle latches, eg. "thranda/switches/ThrottleLatch0"
-Improved yaw damper control authority
-Changed pulsating beacon to flashing beacon
-Improved Engine Overspeed test: If N1 is between 26 and 40%, this will shut down the engine. This can be reset by either re-starting the engine, or powering down the ESS DC bus.
-Fixed missing FUEL TRANSFER annunciators. They will now properly indicate the center tank transfer valve positions.
-Add missing altitude alert tones
-Fixed ghosting markers on clock
-Re-mapped TOGA button on throttles
-Oxygen test now requires oxygen valve to be open.
-Added Ground Power Unit model.
-Fixed potential negative values for airbrake angle when cold and dark with a tail wind.
-Added limiters to the fuel clickspots in the tablet to prevent over-filling.
-Reduced fuel flow at idle
-Fixed transponder code resetting to previous value if ENT key was pressed after entering the code
-Fixed interior of combi cargo version (Left Door closed from the inside)
-Fixed TMS error when adjusting TGT temp in TGT mode.
-Allowing for volume adjustments on vol knobs that are pushed in. -
How do you get the GTN to work please. From the plugin menu it is grayed out. Saving flight plans in UFMC format from Navigraph is a challenge. Using Little Navmap to convert them atm.