• Categories
  • Recent
  • Tags
  • Popular
  • Users
Collapse
Just Flight Community Forum

Performance at night / Dynamic lights

Scheduled Pinned Locked Moved Traffic Global P3D/FSX
18 Posts 8 Posters 5.4k Views
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • A Offline
    A Offline
    abueren
    wrote on last edited by
    #1

    Hello,
    while the performane of TG AI is superb at daylight, it's more or less catastrophic at night with dynamic lights. I lose up to 20-25 fps. Any ideas on this?
    Best regards
    Adrian

    1 Reply Last reply
    0
  • M Offline
    M Offline
    MFDC3
    wrote on last edited by MFDC3
    #2

    I have made several flights over the past week during day and night, and have not seen any difference in frame rate effect.

    What happens if disable the TG plug-in. Do you regain the 20-25 fps? If not, then the frame rate loss is due to something else.

    A 1 Reply Last reply
    0
  • DerekD Offline
    DerekD Offline
    Derek JF Staff
    wrote on last edited by
    #3

    Performance at night is no different. Maybe one for JF support if you can't fix it.

    1 Reply Last reply
    0
  • A Offline
    A Offline
    abueren
    replied to MFDC3 on last edited by
    #4

    @MFDC3 I use VoxATC, so I can just press "disable" and all AI Traffic is disabled. This is how I come to this FPS-Drop. Are you using dynamic lighting?

    1 Reply Last reply
    0
  • C Offline
    C Offline
    Cesco
    wrote on last edited by Cesco
    #5

    I have the same exact problem. At night with Dynamic Lights on FPS drop more than 20 frames. If I kill traffic via P3D menu frames goes back to 30 or more even in complex airport such as FlyTampa Toronto or Las Vegas. It definitely is an issue of Traffic Global AI lights since the last update. Never had this problem before, even because dynamic lights were not implemented in TG AI traffic

    And, by the way, no such problem exist during the day.

    I just did a test slewing over FlyTampa Toronto at Night and looking at the main terminal at night:

    • 100% traffic: 8-9 FPS
    • 50% traffic: 13-14 FPS
    • 0% traffic: 35 FPS

    At day, 100% traffic, frames are always between 25 and 30 even with the new A330 and other complex aircrafts

    1 Reply Last reply
    0
  • D Offline
    D Offline
    dai b
    wrote on last edited by
    #6

    I thought I'd have a look at this for myself and record the framerate for a series of scenarios at UK2000 Extreme EGLL on 2018-06-21T 02:00Z in P3d v4.5

    I've concluded that the drop in framerate has nothing to do with TG. The same problem occurs with other traffic, other models, and with no traffic at all.

    I can't post a table directly because text seems to be reformatted, so misaligning the columns, but here's a screenie of my results.

    Traffic was derived from:
    Traffic Global 1.1.1.1b
    AIGroup - everything that OCI could find
    ORBX various sceneries
    UK2000 VFR Vol 2

    a9b88aed-fc76-4f97-b423-5047bb097bf5-image.png

    C 1 Reply Last reply
    1
  • R Offline
    R Offline
    Ray Fry
    wrote on last edited by Ray Fry
    #7

    This is why some users do not use DL it will impact on performance and at some airports it almost unusable.
    KORD without DL . TG AI
    https://www.flickr.com/photos/154944674@N05/48629766123/in/dateposted-public
    EIDW Dublin no DL TG AI
    https://www.flickr.com/photos/154944674@N05/48933537087/in/dateposted-public/
    FPS locked at 30 and stay at 30.

    P3Dv5.1 HF.

    1 Reply Last reply
    0
  • C Offline
    C Offline
    Cesco
    replied to dai b on last edited by Cesco
    #8

    @dai-b said in Performance at night / Dynamic lights:

    I thought I'd have a look at this for myself and record the framerate for a series of scenarios at UK2000 Extreme EGLL on 2018-06-21T 02:00Z in P3d v4.5

    I've concluded that the drop in framerate has nothing to do with TG. The same problem occurs with other traffic, other models, and with no traffic at all.

    I can't post a table directly because text seems to be reformatted, so misaligning the columns, but here's a screenie of my results.

    Traffic was derived from:
    Traffic Global 1.1.1.1b
    AIGroup - everything that OCI could find
    ORBX various sceneries
    UK2000 VFR Vol 2

    a9b88aed-fc76-4f97-b423-5047bb097bf5-image.png

    Hello Dai.

    Dynamic lights for AI have been turned on with version 1.1.1.2, so the one you tested has still no impact on performance. I had the same results as yours in v1.1.1.1b, because there's no DL in TG traffic

    And as I said to one of JF representatives on a ticket I submitted, TG AI traffic has taxi and landing lights turned on even when parked at gates, generating even more poor performances.

    I agree that DL has a hit on performance, but this last glitch can be corrected by JF in my opinion, and it can improve performance

    D 1 Reply Last reply
    0
  • D Offline
    D Offline
    dai b
    replied to Cesco on last edited by dai b
    #9

    @Cesco

    Thanks for pointing that out -- I did suspect that an update to TG might have some bearing on matters.

    The point I wanted to make was that dynamic lighting has a detrimental effect on framerate regardless of AI and the OP may have been confusing traffic with dynamic lighting when deciding on the culprit. Also, it may not be TG but all or any AI.

    If you have the patience, perhaps you could run a similar test with v1.1.1.2 and post your results. I'd expect to see a bigger drop in the relevant cells in the two left columns.

    D

    1 Reply Last reply
    0
  • C Offline
    C Offline
    Cesco
    wrote on last edited by
    #10

    Hello D.

    Yes, you're right, DL has a great impact on the overall performance of the simulator.

    But has I said up above, taking FlyTampa Toronto as an example at night time, I have very good frame rates with DL turned on and AI turned off. If I turn on AI traffic at 100% (yes, it's an extreme) frames drop more than 20, with DL on on the rest of the airport. So it's the AI alone that cuts the frame rate so much.

    If I cut the traffic to 20% I have between 15-20 frames per second. If I cut it to 0% frames go to the 30s.

    Maybe cutting taxi and landing lights to all the parked aircraft, a glitch on JF side in my opinion, could bring back frames to an acceptable number even with everything turned on.

    Bye!

    Francesco

    S 1 Reply Last reply
    0
  • S Offline
    S Offline
    Saldo
    replied to Cesco on last edited by
    #11

    Here I use FsReborn Pro nightlighting with TG. Improved nightlighting and less impact on fps..

    Regards,
    Gerard

    C 1 Reply Last reply
    0
  • C Offline
    C Offline
    Cesco
    replied to Saldo on last edited by
    #12

    @Saldo said in Performance at night / Dynamic lights:

    Here I use FsReborn Pro nightlighting with TG. Improved nightlighting and less impact on fps..

    Good to know! I was evaluating FSReborn but I'm afraid that it's up to JF to correct some stuff in Traffic Global like taxi and landing lights on at gates.

    Is the difference really noticeable with FSReborn?

    Thanks

    1 Reply Last reply
    0
  • C Offline
    C Offline
    Cesco
    wrote on last edited by
    #13

    I bought FS Reborn AI Lights and it is a very good program, but it doesn't solve this glitch of TG AI Planes.

    I then took some time to see if something could be done in P3D to ease the situation, just moving some options.

    What really makes a HUGE difference is turning off LANDING LIGHTS ILLUMINATE GROUND. At that point all landing lights of AI planes cease to illuminate the airport and frame rates make a huge bump upwards, going back to 30 and more, with still all the rest of dynamic lighting turned on, both on planes and on the airport itself.

    And all the advanced planes (Aerosoft, PMDG, ecc.) are not touched by this change because they have proprietary lighting and they STILL illuminate ground with landing, taxiing and turnaround lights. The default F22 on the other hand will lose this feature, for example. Same will be for AI on landing, but this way you can still afford to leave traffic at 100% at night even on complex airports.

    Still I believe that if JF could turn off landing lights for parked planes this workaround would not be needed anymore.

    Hope this helps people having the same issue and maybe not a super recent rig like me.

    S D 2 Replies Last reply
    0
  • S Offline
    S Offline
    Saldo
    replied to Cesco on last edited by Saldo
    #14

    I guess it all depends on your settings and hardware.

    No performance issues here but I keep the framerate locked with Vsync which gives the system some headroom ..

    Regards,
    Gerard

    1 Reply Last reply
    0
  • D Offline
    D Offline
    discover_06
    wrote on last edited by discover_06
    #15

    Hi,

    I as well am having the same exact issue. Never had at a problem flying at night up until recent weeks. Day flights are smooth and great. After doing some testing and researching for couple days, I figured out that the AI traffic density is what causes the massive fps drop especially around cockpit view (using ChasePlane) and outside at times in certain areas (tested at the gate in CYYZ). I have to leave it at 10% for it to not cause spike lags or stutters. I'm sure you already gave that a look. It's quite annoying since I never had problems before. I hope this is something that JF can look into and update.

    1 Reply Last reply
    0
  • D Offline
    D Offline
    discover_06
    replied to Cesco on last edited by discover_06
    #16

    @Cesco said in Performance at night / Dynamic lights:

    I bought FS Reborn AI Lights and it is a very good program, but it doesn't solve this glitch of TG AI Planes.

    I then took some time to see if something could be done in P3D to ease the situation, just moving some options.

    What really makes a HUGE difference is turning off LANDING LIGHTS ILLUMINATE GROUND. At that point all landing lights of AI planes cease to illuminate the airport and frame rates make a huge bump upwards, going back to 30 and more, with still all the rest of dynamic lighting turned on, both on planes and on the airport itself.

    And all the advanced planes (Aerosoft, PMDG, ecc.) are not touched by this change because they have proprietary lighting and they STILL illuminate ground with landing, taxiing and turnaround lights. The default F22 on the other hand will lose this feature, for example. Same will be for AI on landing, but this way you can still afford to leave traffic at 100% at night even on complex airports.

    Still I believe that if JF could turn off landing lights for parked planes this workaround would not be needed anymore.

    Hope this helps people having the same issue and maybe not a super recent rig like me.

    THANK YOU SO MUCH! I literally spent 2 days tweaking and playing around to find a workaround this. Gladly the lights still illuminate with A320. Although if I use any other aircraft I still have to enable lighting illumination and hence repeats the low FPS hit again. Kind of annoying that I once was able to have all dynamic lighting on and work flawless before the latest update. JF needs to really look into this. Unless there's a way in cfg settings that I can just turn off AI illumination until the problem is updated.

    1 Reply Last reply
    0
  • D Offline
    D Offline
    discover_06
    wrote on last edited by
    #17

    I also tried AI Lights Reborn hoping that it would work but as stated above this doesn't solve it. Great add-on though.

    1 Reply Last reply
    0
  • R Offline
    R Offline
    Ray Fry
    wrote on last edited by
    #18

    Uncheck DL in P3Dv4 light settings and test.

    P3Dv5.1 HF.

    1 Reply Last reply
    0

  • Login

  • Don't have an account? Register

  • Login or register to search.
  • First post
    Last post
0
  • Categories
  • Recent
  • Tags
  • Popular
  • Users