Black Square Analog Baron Fuel Pump Lvars
-
I can upload a profile when I get home in a couple of days, may I ask what controllers you use?
-
I can upload a profile when I get home in a couple of days, may I ask what controllers you use?
@GunStrauss said in Black Square Analog Baron Fuel Pump Lvars:
I can upload a profile when I get home in a couple of days, may I ask what controllers you use?
I'm not sure what you mean by "controller". I think my answer should be "None".
I have built a cockpit in which I have replicated the pilot's side of the 3D image you see in the Baron in FS2020. So I have physical switches connected to a Leo Bodnar board (BU0836X) and I am using SPAD.neXt to handle the switch inputs for me.I have been busy researching and have got it working satisfactorily. I discovered that I have to turn on the correct electrical circuit as well as switch the pump on.
“A:CIRCUIT SWITCH ON:4, bool”, and “A:CIRCUIT SWITCH ON:5, bool”
So, for the left pump switch:
“Set LVAR:VAR_FUEL-SWITCH_PUMP_1 to #"; where # is the state of the switch. 0=Off, 1=Low, 2=High.'
and Set CIRCUIT_SWITCH_ON:4 to 1 (or 0 for off)
For the right pump switch:
Same as above except use “Set LVAR:VAR_FUEL-SWITCH_PUMP_2” and
for the electrical circuit use “Set CIRCUIT_SWITCH_ON:5 to 1” (or 0 as appropriate)
Everything is now working as it should.
Cheers! -
Is there any list of Lvars etc for the BKSQ Baron?
I Got the plane to work in MSFS24, but i just cant find how to control some of the switches, for example Fuel Pump switches, all the de/anti-ice I am using SPAD!I can not even get the fuel pump switches to work via MSFS control settings!
-
Hello Ernie,
That must be frustrating for you. One of the joys of this game. It's been 16 months since this post was active so I'm a little uncertain where I might've saved things or what I have deleted in the past few months.
In a few hours time I will be able to have a search through my file system and see if I can find a link for you. As I recall, there was a very useful online resource that some kind person passed me a link to. I'll look for that.
Sorry about the time delay. -
Hello Ernie,
That must be frustrating for you. One of the joys of this game. It's been 16 months since this post was active so I'm a little uncertain where I might've saved things or what I have deleted in the past few months.
In a few hours time I will be able to have a search through my file system and see if I can find a link for you. As I recall, there was a very useful online resource that some kind person passed me a link to. I'll look for that.
Sorry about the time delay.@djw4250
Hey! Thanks mate! Happy you replied!
I have tried with the settings of Lvars etc above here, but does not do anything. Now, I am using MSFS2024 for this, just for info.I have also tried all MSFS controls setting regarding pumps & bus circuits etc to no avail.
Oh, and I also tried the "Behaviours" Tool in Dev Mode, but i believe they were "O" & "K" vars.I can use the mouse of corse, its just so fiddly with the Fuel pump switches.
Happy if you have any tips at all, but I will survive otherwise as well
haha. And no hurry of corse.(I Live in Sweden, so UTC -1 now)
-
@ErnieBall with a greeting like that I become curious about what part of the world you live in.
I contacted the BKSQ Baron vendor and found them very helpful.
I'll have a look later today. Just a few things I have to do first.
Cheers from NZ -
@ErnieBall with a greeting like that I become curious about what part of the world you live in.
I contacted the BKSQ Baron vendor and found them very helpful.
I'll have a look later today. Just a few things I have to do first.
Cheers from NZ -
@ErnieBall
I was engaged in a nice conversation with @Blackquare (here is a link to it https://community.justflight.com/topic/6020/baron-icing-switches/29?_=1711145386266) and he included a hyperlink in one of his messages that might be useful for you too.
Good luck.
Regards
Davidhttps://hubhop.mobiflight.com/presets/
