This was altered in response to some feedback on the forum
I was referring to this CBT section https://youtu.be/16OonNEiHFk
From 11:26 mins onwards
I wasnt really aware that the brake indicators do not show the accumulated pressure in the system but only the applied pressure. So then of course it makes sense that an indication will only be there if the brakes are set.
Thanks for the heads up. 🙂
The Brake Pressure indicator at the bottom of the main oanel is the only indication you'll see regarding the DC Pump. Normally, these gauges will show brake pressure when brakes are applied (either yellow or green). With the Park Brake set, the yellow gauge shows the accumulator pressure, which dissipates over time. Hitting the DC pump should increase that pressure back to approx 3000psi.