FMC Display Bug - TOC Numbers crazy after stop and go climb
-
Hello!
I was just on a flight from EDDK-LIML (Cologne to Milano). I was online on VATSIM and due to traffic the climb was a stop and go.- I had to stop at 5000ft for a short time after Takeoff
- After this I was cleared to FL140 - But during the climb I had to increase VS to 2000fpm or greater due to traffic separation. I selected VS and 2500fpm.
- After less then a minute I was cleared to normal climb rate and FL250 - I selected LVLCHG and 260kts.
At FL250 I looked onto the PROG page on the FMC on the FO side and found the number salad in the "TO T/C" field you see on this screenshot:
This is the Main view at this time:
This is the Flightplan - Planned with Simbrief, AIRAC 2411, Navigraph Hub:
EDDK/31R KUMI1R KUMIK Y854 BOMBI DCT GIGET DCT ABUKA DCT KRH DCT NATOR N850 ODINA ODI3R.SRN3S LIML/UNDAP.I35-Z -
Oh yeah. I've had that happen to me, too.
-
I had some issues with too, one or two times, for example, the scratchpad section was black, even if I fill something in, or even if I had some messages form the FMS...it remains black.
-
Bump - Just want to make sure this gets not overseen.
-
Hi all, we have been looking into this one but it's proving a difficult one to replicate. Once you pass over the T/C point, the TO T/C field on the PROGRESS page should be hidden once the aircraft reaches the T/C (and that's the logic we are seeing on our side).
Could I ask when this issue occurs:
- Were all mandatory fields on the PERF INIT page completely filled out when creating the flight plan (GW/ZFW, RESERVES, CRZ ALT)?
- Were any modifications done to the flight plan after it was original created? I.e, any Direct-Tos, new waypoints added, etc.
Any other information would also be appreciated. as once we are able to reproduce the issue it will likely become much simpler to fix.
Mark - Just Flight
-
@Mark said in FMC Display Bug - TOC Numbers crazy after stop and go climb:
Hi all, we have been looking into this one but it's proving a difficult one to replicate. Once you pass over the T/C point, the TO T/C field on the PROGRESS page should be hidden once the aircraft reaches the T/C (and that's the logic we are seeing on our side).
Could I ask when this issue occurs:
- Were all mandatory fields on the PERF INIT page completely filled out when creating the flight plan (GW/ZFW, RESERVES, CRZ ALT)?
- Were any modifications done to the flight plan after it was original created? I.e, any Direct-Tos, new waypoints added, etc.
Any other information would also be appreciated. as once we are able to reproduce the issue it will likely become much simpler to fix.
Mark - Just Flight
1 - All fields where filled on the PERF pg.
2 - I got a direct to KUMIK shortly after DK038 I think. (KUMIK1R departure)
