I am on FS2020 and using rudder pedals for rudder and brake control and an axis from the Thrustmaster Boeing yoke (one of the two little thrust levers in the bottom) for the steering tiller. All is controlled by FSUIPC and works for every other plane (737, 777, A310 e.g.) and even on the Just Flight Avro RJ perfectly but not on the Fokker 70/100. The setting on the Fokker EFB is correct (Rudder & Steering on same axis - not checked).

The rudder controlled by the pedals works fine and also makes a little input on the Nosewheel steering, but if I set steering axis via FSUIPC to that little lever it interferes with the rudder but has no effect to the steering. I even tried other hardware or other axis but the nosewheel steering only works if I combine it with the rudder by changing the EFB setting. I also tried using the default MSFS steering axis on any axis on my hardware, but I can't find any way to control rudder and the steering separate from each other.

I am willing to look for the error at myself however I copied the FSUIPC profile exactly from the Avro - where it works - but still no success on the fokker.

If anybody could please confirm if something is off with the Fokker or that he has no problems separating steering and rudder (and how he has set it) I would be very happy.