<![CDATA[Garmin GNS430 CDI not working correctly.]]>Hi Support,

The GNS430 in the Pro Black Square Baron does not seem to work correclty.

If I "direct too" a location and look at the CDI it is giving a static centred CDI and no distances etc..

This occurs in the configuration with COMM1 as KX 155B and COMM2 as the GNS430.

Strangely it works if you use the GNS530 as COMM1 and the GNS430 as COMM2.

Can this be investigated as I'd prefer the first setup not the second.

Regards,
xdefiantx

]]>https://community.justflight.com/topic/11254/garmin-gns430-cdi-not-working-correctly.RSS for NodeMon, 24 Aug 2026 11:32:20 GMTMon, 24 Aug 2026 07:55:39 GMT60<![CDATA[Reply to Garmin GNS430 CDI not working correctly. on Mon, 24 Aug 2026 08:43:44 GMT]]>That's because the GNS 430 is not connected to the CDI, and cannot control the autopilot. The GTN 650 (from both PMS50 and TDS) can provide autopilot and CDI guidance, but this is a limitation of the GNS 430, unfortunately. I have requested that Working Title provide the option I need to implement this, but their priorities are understandably elsewhere.

]]>https://community.justflight.com/post/54160https://community.justflight.com/post/54160Mon, 24 Aug 2026 08:43:44 GMT