<![CDATA[EDM LOP Leaning is wrong (still)]]>Referreing to my post in the Baron thread, also valid for the Bonanza as well.
=> https://community.justflight.com/topic/9566/tit-gauge/8

LOP:
Here is how the EDM looks like for LOP leaning: https://www.youtube.com/watch?v=s8-xl44aljc

  1. Lean => pillars rise from bottom to top until
  2. EDM finds LEANEST => picture then switches and the pillars build from top to bottom
  3. EDM finds RICHEST => Delta (lower left) is set to 0 at this point, and you keep leaning until 20-30° LOP.

Currently, selecting LOP, the EDM omits step 1 and 2 and starts with 3. Also, when finding the RICHEST, the Delta in the lower left immediately shows around -20. It set be to zero at the temp when the richest was found.

ROP:
Works quite well, but also here: When LEANEST is announced, the Delta is at approx -25 or so. It set be to zero at the temp when the leanest was found, so you can set it to -50 and for ROP ops.

]]>https://community.justflight.com/topic/11110/edm-lop-leaning-is-wrong-stillRSS for NodeSat, 01 Aug 2026 09:20:42 GMTFri, 31 Jul 2026 16:11:48 GMT60<![CDATA[Reply to EDM LOP Leaning is wrong (still) on Sat, 01 Aug 2026 08:50:46 GMT]]>@MatzeH84 Last time you brought this up, I believe I said that I would tackle it after adopting the new mixture control, as I tried to live by the programming adage that you should only change one thing at a time. Seeing as I just finished implementing the new fuel flow across my entire fleet, I suppose the day has come.

I thought this was going to be relatively easy, but unfortunately, I quickly discovered why I didn't implement this the first time around. It's a very long story, affecting so many systems. I've been working on this literally all day since your message, but this is going to be a multi-day project. I'll let you know where it ends up, but right now, I'm confident that it will be much better, albeit not perfect.

]]>https://community.justflight.com/post/53161https://community.justflight.com/post/53161Sat, 01 Aug 2026 08:50:46 GMT